hardware-modules

The PoC Library has been forked to github.com/VHDL/PoC. See new address below

Valve Index DEV Frunk 1.0 Custom made to give the Index more Mounting Options for Adapters and DIY Devices. All Modifications that i create are Reversible and will not damage the Product. (Except you try to break it on purpose)

QN8035 based Raspberry Pi FM radio receiver

Computer Architecture -VLSI -Verilog Codes-Xilinx-Irsim

Yet Another LCD Interface

Hardware/Software | Generic ISP Interface, MCU PIC8-bit SPI Interface. 2.4GHz, Low Energy Bluetooth.

Hardware/Software | NANDFlash Memory Interface to SPI capable device.

Hardware/Software | GPIO Out is Uni/Bi Coil Compatible, MCU/ADC/TTL, VSense over Darlington Transistor Array

A standard controller and safety module (open motor controller, e-stop, speed limit and brake interlock) with a named reference hub motor, which the lab's mobility and automation designs bolt on rather than re-engineer.

An open battery management board for small LiFePO4 packs (4 to 16 cells) with cell balancing, protection and a documented state-of-charge estimate, reusable across the lab's vehicles, storage and field kits.

A sealed, swappable phase-change thermal cartridge in a few standard temperature ranges (cold chain, comfort and hot holding) that stores heat or cold and drops into coolers, cabinets and heat exchangers.

A solar-powered, weatherproof sensor node with a common mounting, power and radio core, so any lab project that needs to measure something outdoors starts from the same tested base instead of a new enclosure and charger each time.