Repository navigation
Conversation
Setting the symbol namespace of a symbol within sym_add_exported feels displaced and lead to issues in the current implementation of symbol namespaces. This patch makes updating the namespace an explicit call to decouple it from adding a symbol to the export list. Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
The introduction of Symbol Namespaces changed the naming schema of the __ksymtab entries from __kysmtab__symbol to __ksymtab_NAMESPACE.symbol. That caused some breakages in tools that depend on the name layout in either the binaries(vmlinux,*.ko) or in System.map. E.g. kmod's depmod would not be able to read System.map without a patch to support symbol namespaces. A warning reported by depmod for namespaced symbols would look like depmod: WARNING: [...]/uas.ko needs unknown symbol usb_stor_adjust_quirks In order to address this issue, revert to the original naming scheme and rather read the __kstrtabns_<symbol> entries and their corresponding values from __ksymtab_strings to update the namespace values for symbols. After having read all symbols and handled them in handle_modversions(), the symbols are created. In a second pass, read the __kstrtabns_ entries and update the namespaces accordingly. Fixes: 8651ec0 ("module: add support for symbol namespaces.") Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
We must return a mask covering the full physical RAM when bypassing the IOMMU mapping. Also, in iommu_need_mapping, we need to check using dma_direct_get_required_mask to ensure that the device's dma_mask can cover physical RAM before deciding to bypass IOMMU mapping. Based on an earlier patch from Christoph Hellwig. Fixes: 249baa5 ("dma-mapping: provide a better default ->get_required_mask") Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
The OMAP IOMMU driver requires the device_enable/idle platform data ops on all the IOMMU devices to be able to enable and disable the clocks after commit db8918f ("iommu/omap: streamline enable/disable through runtime pm callbacks"). Plug in these pdata ops for all the existing IOMMUs through pdata quirks to maintain functionality. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
The OMAP3 ISP IOMMU does not have any reset lines, so it didn't need any pdata previously. The OMAP IOMMU driver now requires the platform data ops for device_enable/idle on all the IOMMU devices after commit db8918f ("iommu/omap: streamline enable/disable through runtime pm callbacks") to enable/disable the clocks properly and maintain the reference count and the omap_hwmod state machine. So, add these callbacks through iommu pdata quirks for the OMAP3 ISP IOMMU. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
I noticed that when probed with ti-sysc, watchdog can trigger on am3, am4 and dra7 causing a device reset. Turns out I made several mistakes implementing the watchdog quirk handling: 1. We must do both writes to spr register 2. We must also call the reset quirk on disable 3. On am3 and am4 we need to also set swsup quirk flag I probably only tested this earlier with watchdog service running when the watchdog never gets disabled. Fixes: 4e23be4 ("bus: ti-sysc: Add support for module specific reset quirks") Signed-off-by: Tony Lindgren <tony@atomide.com>
In the format of synthetic events, the "gfp_t" is shown as "signed:1",
but in fact the "gfp_t" is "unsigned", should be shown as "signed:0".
The issue can be reproduced by the following commands:
echo 'memlatency u64 lat; unsigned int order; gfp_t gfp_flags; int migratetype' > /sys/kernel/debug/tracing/synthetic_events
cat /sys/kernel/debug/tracing/events/synthetic/memlatency/format
name: memlatency
ID: 2233
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:u64 lat; offset:8; size:8; signed:0;
field:unsigned int order; offset:16; size:4; signed:0;
field:gfp_t gfp_flags; offset:24; size:4; signed:1;
field:int migratetype; offset:32; size:4; signed:1;
print fmt: "lat=%llu, order=%u, gfp_flags=%x, migratetype=%d", REC->lat, REC->order, REC->gfp_flags, REC->migratetype
Link: http://lkml.kernel.org/r/20191018012034.6404-1-zhengjun.xing@linux.intel.com
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
…x/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.4-rc4 Here's a fix for a long-standing locking bug in ti_usb_3410_5052 and related clean up. Both have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org> * tag 'usb-serial-5.4-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: ti_usb_3410_5052: clean up serial data access USB: serial: ti_usb_3410_5052: fix port-close races
Fix broken read implementation, which could be used to trigger slab info leaks. The driver failed to check if the custom ring buffer was still empty when waking up after having waited for more data. This would happen on every interrupt-in completion, even if no data had been added to the ring buffer (e.g. on disconnect events). Due to missing sanity checks and uninitialised (kmalloced) ring-buffer entries, this meant that huge slab info leaks could easily be triggered. Note that the empty-buffer check after wakeup is enough to fix the info leak on disconnect, but let's clear the buffer on allocation and add a sanity check to read() to prevent further leaks. Fixes: 2824bd2 ("[PATCH] USB: add ldusb driver") Cc: stable <stable@vger.kernel.org> # 2.6.13 Reported-by: syzbot+6fe95b826644f7f12b0b@syzkaller.appspotmail.com Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191018151955.25135-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bcm2835-rpi.dtsi defines the behavior of the ACT LED, which is available on all Raspberry Pi boards. But there is no driver for this particual GPIO on CM3 in mainline yet, so this node was left incomplete without the actual GPIO definition. Since commit 025bf37 ("gpio: Fix return value mismatch of function gpiod_get_from_of_node()") this causing probe issues of the leds-gpio driver for users of the CM3 dtsi file. leds-gpio: probe of leds failed with error -2 Until we have the necessary GPIO driver hide the ACT node for CM3 to avoid this. Reported-by: Fredrik Yhlen <fredrik.yhlen@endian.se> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Fixes: a54fe8a ("ARM: dts: add Raspberry Pi Compute Module 3 and IO board") Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
USB_DR_MODE_UNKNOWN should be treated as error as it is done in cdns3_drd_update_mode(). Fixes: 02ffc26 ("usb: cdns3: fix cdns3_core_init_role()") Signed-off-by: Roger Quadros <rogerq@ti.com> Link: https://lore.kernel.org/r/20191017075801.8734-1-rogerq@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Switch to using my paulburton@kernel.org email address in order to avoid subject mangling that's being imposed on my previous address. Signed-off-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: linux-kernel@vger.kernel.org
On some MIPS variants (e.g. MIPS r1), vDSO clock_mode is set to VDSO_CLOCK_NONE. When VDSO_CLOCK_NONE is set the expected kernel behavior is to fallback on syscalls. To do that the generic vDSO library expects UULONG_MAX as return value of __arch_get_hw_counter(). Fix __arch_get_hw_counter() on MIPS defining a __VDSO_USE_SYSCALL case that addressed the described scenario. Reported-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Tested-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: linux-mips@vger.kernel.org
This commit is a preparation to handle several IR/IT contexts in the same domain by tasklet context for one of the IT context. Such IT context is stored to AMDTP domain structure as 'irq_target'. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191018061911.24909-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
…n AMDTP domain An isoc context for AMDTP stream is flushed to queue packet by a call of pcm.pointer. This commit extends this for AMDTP domain. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191018061911.24909-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
…DTP domain An isoc context for AMDTP stream is flushed to queue packet by a call of pcm.ack. This commit extends this for AMDTP domain. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191018061911.24909-4-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
… process context callback The aim of AMDTP domain is to process several isoc context in the same time. However, current implementation is against this idea because it flushes each isoc context in the end of processing context callback. This commit cancels it. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191018061911.24909-5-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
…of IRQ target This commit changes AMDTP domain to run on an IT context of 1394 OHCI as IRQ target. No hardware interrupt is scheduled for the other isoc contexts. All of the isoc context are processed in a callback for an isoc context of IRQ target. The IRQ target is automatically selected from a list of AMDTP streams, thus users of AMDTP domain should add an AMDTP stream for IT context at least. The reason to select IT context as IRQ target is that the IT context runs on local 1394 OHCI controller and it can be used as reliable, constant IRQ generator. On the other hand, IR context can include skip cycle according to isoc packet transferred by device. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191018061911.24909-6-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some devices have a quirk to postpone transmission of isoc packet for several dozen or hundred isoc cycles since configured to transmit. Furthermore, some devices have a quirk to transmit isoc packet with discontinued data of its header. In 1394 OHCI specification, software allows to start isoc context with certain isoc cycle. Linux firewire subsystem has kernel API to use it as well. This commit uses the functionality of 1394 OHCI controller to handle the quirks. At present, this feature is convenient to ALSA bebob and fireface driver. As a result, some devices can be safely handled, as long as I know: - MAudio FireWire solo - MAudio ProFire Lightbridge - MAudio FireWire 410 - Roland FA-66 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191018061911.24909-7-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a counter is disabled, its value is sampled before the event is being disabled, and the value written back in the shadow register. In that process, the value gets truncated to 32bit, which is adequate for any counter but the cycle counter (defined as a 64bit counter). This obviously results in a corrupted counter, and things like "perf record -e cycles" not working at all when run in a guest... A similar, but less critical bug exists in kvm_pmu_get_counter_value. Make the truncation conditional on the counter not being the cycle counter, which results in a minor code reorganisation. Fixes: 80f393a ("KVM: arm/arm64: Support chained PMU counters") Reviewed-by: Andrew Murray <andrew.murray@arm.com> Reported-by: Julien Thierry <julien.thierry.kdev@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
Of PMCR_EL0.LC, the ARMv8 ARM says: "In an AArch64 only implementation, this field is RES 1." So be it. Fixes: ab94683 ("arm64: KVM: Add access handler for PMCR register") Reviewed-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
…nel event The current convention for KVM to request a chained event from the host PMU is to set bit[0] in attr.config1 (PERF_ATTR_CFG1_KVM_PMU_CHAINED). But as it turns out, this bit gets set *after* we create the kernel event that backs our virtual counter, meaning that we never get a 64bit counter. Moving the setting to an earlier point solves the problem. Fixes: 80f393a ("KVM: arm/arm64: Support chained PMU counters") Reviewed-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
The PMU emulation code uses the perf event sample period to trigger the overflow detection. This works fine for the *first* overflow handling, but results in a huge number of interrupts on the host, unrelated to the number of interrupts handled in the guest (a x20 factor is pretty common for the cycle counter). On a slow system (such as a SW model), this can result in the guest only making forward progress at a glacial pace. It turns out that the clue is in the name. The sample period is exactly that: a period. And once the an overflow has occured, the following period should be the full width of the associated counter, instead of whatever the guest had initially programed. Reset the sample period to the architected value in the overflow handler, which now results in a number of host interrupts that is much closer to the number of interrupts in the guest. Fixes: b02386e ("arm64: KVM: Add PMU overflow interrupt routing") Reviewed-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
Jan reported failing ltp test for PT: https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/tracing/pt_test/pt_test.c It looks like the reason is this new commit added in this v5.4 merge window: 38bb8d7 ("perf/x86/intel/pt: Split ToPA metadata and page layout") which did not keep the TOPA_SHIFT for entry base. Add it back. Reported-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 38bb8d7 ("perf/x86/intel/pt: Split ToPA metadata and page layout") Link: https://lkml.kernel.org/r/20191019220726.12213-1-jolsa@kernel.org [ Minor changelog edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
Introduce frequency QoS, based on the "raw" low-level PM QoS, to represent min and max frequency requests and aggregate constraints. The min and max frequency requests are to be represented by struct freq_qos_request objects and the aggregate constraints are to be represented by struct freq_constraints objects. The latter are expected to be initialized with the help of freq_constraints_init(). The freq_qos_read_value() helper is defined to retrieve the aggregate constraints values from a given struct freq_constraints object and there are the freq_qos_add_request(), freq_qos_update_request() and freq_qos_remove_request() helpers to manipulate the min and max frequency requests. It is assumed that the the helpers will not run concurrently with each other for the same struct freq_qos_request object, so if that may be the case, their uses must ensure proper synchronization between them (e.g. through locking). In addition, freq_qos_add_notifier() and freq_qos_remove_notifier() are provided to add and remove notifiers that will trigger on aggregate constraint changes to and from a given struct freq_constraints object, respectively. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Replace the CPU device PM QoS used for the management of min and max frequency constraints in cpufreq (and its users) with per-policy frequency QoS to avoid problems with cpufreq policies covering more then one CPU. Namely, a cpufreq driver is registered with the subsys interface which calls cpufreq_add_dev() for each CPU, starting from CPU0, so currently the PM QoS notifiers are added to the first CPU in the policy (i.e. CPU0 in the majority of cases). In turn, when the cpufreq driver is unregistered, the subsys interface doing that calls cpufreq_remove_dev() for each CPU, starting from CPU0, and the PM QoS notifiers are only removed when cpufreq_remove_dev() is called for the last CPU in the policy, say CPUx, which as a rule is not CPU0 if the policy covers more than one CPU. Then, the PM QoS notifiers cannot be removed, because CPUx does not have them, and they are still there in the device PM QoS notifiers list of CPU0, which prevents new PM QoS notifiers from being registered for CPU0 on the next attempt to register the cpufreq driver. The same issue occurs when the first CPU in the policy goes offline before unregistering the driver. After this change it does not matter which CPU is the policy CPU at the driver registration time and whether or not it is online all the time, because the frequency QoS is per policy and not per CPU. Fixes: 67d874c ("cpufreq: Register notifiers with the PM QoS framework") Reported-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Reported-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Diagnosed-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/linux-pm/5ad2624194baa2f53acc1f1e627eb7684c577a19.1562210705.git.viresh.kumar@linaro.org/T/#md2d89e95906b8c91c15f582146173dce2e86e99f Link: https://lore.kernel.org/linux-pm/20191017094612.6tbkwoq4harsjcqv@vireshk-i7/T/#m30d48cc23b9a80467fbaa16e30f90b3828a5a29b Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
There are no more active users of DEV_PM_QOS_MIN_FREQUENCY and DEV_PM_QOS_MAX_FREQUENCY device PM QoS request types, so drop them along with the code supporting them. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
We only want to avoid blocking in connect when mounting SMB root filesystems, otherwise bail out from generic_ip_connect() so cifs.ko can perform any reconnect failover appropriately. This fixes DFS failover/reconnection tests in upstream buildbot. Fixes: 8eecd1c ("cifs: Add support for root file systems") Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
It could be confusing why we set granularity to 1 seconds rather than 2 seconds (1 second is the max the VFS allows) for these mounts to very old servers ... Signed-off-by: Steve French <stfrench@microsoft.com>
… for protocol v2 In MOTU FireWire series, devices which support protocol version 2 have several types of hardware design to process audio data frames for isoc packet. Roughly devices are categorized into three groups: - 828mkII - Traveler/896HD - UltraLite/8pre FireWire Some bit flags in register addressed by 0x'ffff'f000'0b14 includes device-specific effects. This commit cleanups implementation of protocol v2 in this point. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191030080644.1704-6-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
UltraLite was shipped in 2005 by MOTU, and already discontinued. This
model consists of below ICs:
- Texus Instruments TSB41AB2 for physical layer of IEEE 1394 bus
- Xilinx Spartan XC35S200 for link layer of IEEE 1394 bus, protocol layer
and signal processing
This commit adds support for this model. Like the other MOTU models,
ALSA firewire MOTU driver fails to drive the device for stable sampling
clock and generate noisy sound.
$ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 04107574 bus_info_length 4, crc_length 16, crc 30068
404 31333934 bus_name "1394"
408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4)
40c 0001f200 company_id 0001f2 |
410 0007b82d device_id 000007b82d | EUI-64 0001f2000007b82d
root directory
-----------------------------------------------------------------
414 0004c65c directory_length 4, crc 50780
418 030001f2 vendor
41c 0c0083c0 node capabilities per IEEE 1394
420 8d000006 --> eui-64 leaf at 438
424 d1000001 --> unit directory at 428
unit directory at 428
-----------------------------------------------------------------
428 0003d80a directory_length 3, crc 55306
42c 120001f specifier id
430 1300000d version
434 17100800 model
eui-64 leaf at 438
-----------------------------------------------------------------
438 00024566 leaf_length 2, crc 17766
43c 0001f200 company_id 0001f2 |
440 0007b82d device_id 000007b82d | EUI-64 0001f2000007b82d
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191030080644.1704-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Just fix a typo of "S/PDIF" in the clock name string. Fixes: 4638ec6 ("ALSA: firewire-motu: add proc node to show current statuc of clock and packet formats") Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191030100921.3826-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch fixup this warning
LINUX/sound/soc/codecs/rt5677-spi.c: In function ‘rt5677_spi_pcm_close’:
LINUX/sound/soc/codecs/rt5677-spi.c:114:30: warning: unused variable ‘rtd’ [-Wunused-variable]
struct snd_soc_pcm_runtime *rtd = substream->private_data;
^~~
Fixes: a0e0d13 ("ASoC: rt5677: Add a PCM device for streaming hotword via SPI")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a79idajh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_tplg_component_remove() is pair of snd_soc_tplg_component_load(), and it is topology related cleanup function. The driver which called _load() needs to call _remove() by its responsibility. Today, skl-pcm and topology are the user, and these are calling both _load() and _remove(). soc-core doesn't need to call it. This patch remove it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/8736fbdnwt.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
plbossart
requested review from
bardliao,
dbaluta,
lgirdwood,
libinyang,
lyakh,
ranj063 and
xiulipan
as code owners
October 30, 2019 14:24
Member
Author
|
@fredoh9 can you help me interpret the results, I see two fails on this PR? |
|
@plbossart We did some manually test on the device and find that this issue is casued by machine driver name changing and our alsactl restore fail. But the audio quality on those device is clear without noise. The PR can be merged. And we will try to fix the alsactl issue ASAP. |
Collaborator
Indeed, not a nice patch to rebase/merge between versions. But looks good, thanks! |
kv2019i
approved these changes
Oct 31, 2019
Member
Author
|
@plbossart I have discussed with @kv2019i about the hdmi patch changing. We will try to test with new feature on all CI device before we merge the thesofproject/kconfig#15 |
This was referenced Nov 4, 2019
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
20 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
This merge contains @kv2019i 's changes for HDMI, so better check that the merge was done right (2-3 conflicts in Makefiles)
Also a fix for rt5677 which should help with CI.