You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
{{ message }}
Repository navigation
Which Firmware file for Synaptics 06cb:008a (or other) #4
Firmware is a file with .xpfwext extension, which comes from your windows driver.
Try using innoextract to extract everything from your diver installer .exe file and look for .xpfwext files.
Solution for Synaptics WBDI 06cb:008a (Viper family)
I have successfully reverse-engineered and enabled the 06cb:008a sensor natively on Linux (Ubuntu 24.04 LTS / Toshiba Tecra X40-D / Dynabook).
Why previous attempts stalled:
No Firmware Extension Exists or is Needed: Unlike 0090/0097/009a, the Viper 008a ASIC (57K0 FM-154-124, ROM 6.20) is strictly Match-on-Host. GetFirmwareInfo (0x4302) returns 0x04af (no firmware detected), and MoC commands (0x68, 0x5e) return error 0401 (invalid command). The official Windows driver (synaWudfBioUsb.dll) streams raw capacitive frames to the host CPU via UMDF.
Flash Disconnects: Attempting to write biometric templates to the SPI flash partition table causes bus contention and reboots (USBError 19: No such device).
How it works:
Frame Acquisition: Calibrated using sensor init sequence and passively awaiting interrupts on EP 0x83 to stream full 56×144 8-bit grayscale matrix frames (8,064 bytes).
Matching Engine: Host-side 2D Phase Correlation (numpy.fft.fft2) with 2D Hann window filtering (eliminating edge boundary artifacts) and an angular tilt search ([-12° .. +12°]) with threshold 0.12.
System Integration: Runs natively under python-validity + open-fprintd with template persistence in /var/lib/python-validity/templates/, fully enabling fprintd-enroll, fprintd-verify, and PAM authentication for sudo and lock screen.
For anyone landing here with 06cb:008a: at least the "86C TM-3322-001" variant (the fingerprint strip in the Toshiba Portege X30-D touchpad, ROM 6.20) works without any firmware file. The 008a code path skips the firmware upload and runs from ROM.
I got it working on Ubuntu 26.04 with host-side capture and matching, as a drop-in fprintd replacement (GNOME Settings, lock screen, sudo, polkit): https://github.com/AdriPerse/viper-fprintd. Use it as a swipe sensor. Protocol notes are in docs/NOTES.md; PR #293 has a different approach that was tested on the Tecra X40-D variant.
(Developed with AI assistance and tested on my own laptop.)
Activity
uunicorn commentedon Jun 18, 2020
Firmware is a file with .xpfwext extension, which comes from your windows driver.
Try using innoextract to extract everything from your diver installer .exe file and look for .xpfwext files.
3v1n0 commentedon Jul 2, 2020
From the inf file looks to be
06cb:00a2: FILL=0x800000 fix + corner-tile gy tightening (big diff drop)
the-muzammilali commentedon Oct 15, 2026
Solution for Synaptics WBDI 06cb:008a (Viper family)
I have successfully reverse-engineered and enabled the
06cb:008asensor natively on Linux (Ubuntu 24.04 LTS / Toshiba Tecra X40-D / Dynabook).Why previous attempts stalled:
0090/0097/009a, the Viper008aASIC (57K0 FM-154-124, ROM6.20) is strictly Match-on-Host.GetFirmwareInfo (0x4302)returns0x04af(no firmware detected), and MoC commands (0x68,0x5e) return error0401(invalid command). The official Windows driver (synaWudfBioUsb.dll) streams raw capacitive frames to the host CPU via UMDF.USBError 19: No such device).How it works:
0x83to stream full 56×144 8-bit grayscale matrix frames (8,064 bytes).numpy.fft.fft2) with 2D Hann window filtering (eliminating edge boundary artifacts) and an angular tilt search ([-12° .. +12°]) with threshold0.12.python-validity+open-fprintdwith template persistence in/var/lib/python-validity/templates/, fully enablingfprintd-enroll,fprintd-verify, and PAM authentication forsudoand lock screen.Repository & Prebuilt .deb Packages:
Install instructions:
AdriPerse commentedon Nov 1, 2026
For anyone landing here with 06cb:008a: at least the "86C TM-3322-001" variant (the fingerprint strip in the Toshiba Portege X30-D touchpad, ROM 6.20) works without any firmware file. The 008a code path skips the firmware upload and runs from ROM.
I got it working on Ubuntu 26.04 with host-side capture and matching, as a drop-in fprintd replacement (GNOME Settings, lock screen, sudo, polkit): https://github.com/AdriPerse/viper-fprintd. Use it as a swipe sensor. Protocol notes are in
docs/NOTES.md; PR #293 has a different approach that was tested on the Tecra X40-D variant.(Developed with AI assistance and tested on my own laptop.)