Home Assistant custom integration for Dooya RF433 tubular motors (blinds, shutters) through an ESPHome ESP32 + CC1101 node. Estimated position, calibration assistant, bundled card.
-
Updated
Nov 14, 2026 - Python
Home Assistant custom integration for Dooya RF433 tubular motors (blinds, shutters) through an ESPHome ESP32 + CC1101 node. Estimated position, calibration assistant, bundled card.
Generic Home Assistant integration for RF (433 MHz) fans — ESPHome gateway, guided code learning, optional light/timers/kelvin/sound/direction.
Raspberry Pi meat curing chamber and mini IoT/home automation framework
Local RF control of AOK/Zemismart 433.92 MHz roller blinds for Home Assistant — MQTT + Sonoff RF Bridge, no cloud
Home Assistant custom integration to control your RF pool lights (replaces the ACM-125C-1 RF Remote)
This is a receiver that decodes the 433Mhz RF codes transmitted by the Fine Offset Electronics WH1080 Weather Station sender module every 95 seconds, translates the data and sends it to an MQTT server
Aggregates multiple RFLink devices (433MHz & 868MHz) from across your home into a single TCP stream — letting Home Assistant connect to all your RF sensors through one unified endpoint. Runs on a Raspberry Pi Zero W.
Tasmota for ESP32 IR + 433 MHz remote boxes (IoTorero AR01V3): air-conditioner infrared and radio in one firmware. Follows new Tasmota releases automatically.
Geeklink IR/RF integration for Home Assistant: UI learning, HACS installation, and automatic hub IP recovery.
Turn raw RF433 MQTT contact-sensor messages into native Home Assistant devices and entities.
Use 433/315 MHz remotes with a Broadlink RM4 Pro without learning them: generate clean packets from Princeton/EV1527 codes or Flipper .sub files (Home Assistant ready)
Home assistant custom integration to trigger RF433 outlets
To associate your repository with the rf433 topic, visit your repo's landing page and select "manage topics."