You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
{{ message }}
Repository navigation
LilyGo T3S3 sx1280+PA / unable to configure radio #280
After installing the latest tinyGS code via VSCode, a check of the serial monitor shows the device in a continuous boot loop.
After loading via the Web Flasher, the 'My TinyGS' wi-fi AP is available and you can log into the web interface to configure the device.
With valid MQTT & other settings entered, the device shows up in the list of tinyGS STATIONS and can be reached via the local LAN wi-fi. My test device has the name 'K4KDR_2g4_2'.
What does not work is the initialization of the LoRa radio ( -2 error ).
After MUCH research to confirm the pin values for this specific device - but with NO luck entering a Board Template that results in a successful radio start, I believe that the issue MIGHT be that there is a difference between the parameter string for an 'sx1280' -vs- this 'sx1280PA'.
... IF the solution to this is the addition of a new 'sx1280PA' radio definition, would you consider putting that on your to-do list? Or, if there is an easier work-around that I can accomplish on my own, I'll be glad to do so.
Something similar happened to me (ESP32 WROOM + Ra-02 SX1278 + NO OLED), and the only thing that worked was modifying the source code. I think it’s necessary to define sx1280PA and see if that works in your case. I can help you look into it if you want, though I’m not sure what the others think about this
Thanks for the help! I also remember building unsupported devices in the past & adding them to ConfigManager.cpp, then installing w/ VSCode. It may come to that but I have other code that DOES work w/ these devices, so I feel like it should work as-is if I can just create the right Board Template. For now, I'll continue working on that method.
Activity
JMJHOX commentedon Oct 22, 2025
Something similar happened to me (ESP32 WROOM + Ra-02 SX1278 + NO OLED), and the only thing that worked was modifying the source code. I think it’s necessary to define sx1280PA and see if that works in your case. I can help you look into it if you want, though I’m not sure what the others think about this
K4KDR commentedon Oct 22, 2025
Thanks for the help! I also remember building unsupported devices in the past & adding them to ConfigManager.cpp, then installing w/ VSCode. It may come to that but I have other code that DOES work w/ these devices, so I feel like it should work as-is if I can just create the right Board Template. For now, I'll continue working on that method.