Repository navigation
ASoC: intel: sof_rt5682: set ignore_pmdown_time to rt5682 dai link - #741
Conversation
plbossart
left a comment
There was a problem hiding this comment.
Agree on the idea, but it can be moved to SKL specific parts. For legacy the MCLK is not controlled by the DSP.
There was a problem hiding this comment.
this should only be set for SKL+, for legacy platforms this is not needed, and actually you can request the MCLK on demand, see e.g. bytcr_rt5640
Also can you rework the code to use the codec components instead of codec_name and codec dai_name.
Use .codecs and .num_codecs instead of .codec_name and .codec_dai_name Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com>
Currently, On CKL+ platforms MCLK will be turned off in sof runtime suspended, and it will go into runtime suspended right after playback is stop. However, rt5682 will output static noise if sysclk turns off during playback. Set ignore_pmdown_time to power down rt5682 immediately and avoid the noise. It can be removed once we can control MCLK by driver. Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com>
it's actually all devm_ based memory allocation that needs to be tested, thanks! |
There was a problem hiding this comment.
@bardliao we typically don't add such messages, maintainers don't like them.
test all devm_ based memory allocation function and return -ENOMEM if it is failed. Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com>
if the IPVS module is removed while the sync daemon is starting, there is a small gap where try_module_get() might fail getting the refcount inside ip_vs_use_count_inc(). Then, the refcounts of IPVS module are unbalanced, and the subsequent call to stop_sync_thread() causes the following splat: WARNING: CPU: 0 PID: 4013 at kernel/module.c:1146 module_put.part.44+0x15b/0x290 Modules linked in: ip_vs(-) nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 veth ip6table_filter ip6_tables iptable_filter binfmt_misc intel_rapl_msr intel_rapl_common crct10dif_pclmul crc32_pclmul ext4 mbcache jbd2 ghash_clmulni_intel snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_nhlt snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper joydev pcspkr snd_timer virtio_balloon snd soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net net_failover virtio_blk failover virtio_console qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ata_piix ttm crc32c_intel serio_raw drm virtio_pci libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: nf_defrag_ipv6] CPU: 0 PID: 4013 Comm: modprobe Tainted: G W 5.4.0-rc1.upstream+ #741 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:module_put.part.44+0x15b/0x290 Code: 04 25 28 00 00 00 0f 85 18 01 00 00 48 83 c4 68 5b 5d 41 5c 41 5d 41 5e 41 5f c3 89 44 24 28 83 e8 01 89 c5 0f 89 57 ff ff ff <0f> 0b e9 78 ff ff ff 65 8b 1d 67 83 26 4a 89 db be 08 00 00 00 48 RSP: 0018:ffff888050607c78 EFLAGS: 00010297 RAX: 0000000000000003 RBX: ffffffffc1420590 RCX: ffffffffb5db0ef9 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffffc1420590 RBP: 00000000ffffffff R08: fffffbfff82840b3 R09: fffffbfff82840b3 R10: 0000000000000001 R11: fffffbfff82840b2 R12: 1ffff1100a0c0f90 R13: ffffffffc1420200 R14: ffff88804f533300 R15: ffff88804f533ca0 FS: 00007f8ea9720740(0000) GS:ffff888053800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3245abe000 CR3: 000000004c28a006 CR4: 00000000001606f0 Call Trace: stop_sync_thread+0x3a3/0x7c0 [ip_vs] ip_vs_sync_net_cleanup+0x13/0x50 [ip_vs] ops_exit_list.isra.5+0x94/0x140 unregister_pernet_operations+0x29d/0x460 unregister_pernet_device+0x26/0x60 ip_vs_cleanup+0x11/0x38 [ip_vs] __x64_sys_delete_module+0x2d5/0x400 do_syscall_64+0xa5/0x4e0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f8ea8bf0db7 Code: 73 01 c3 48 8b 0d b9 80 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 89 80 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffcd38d2fe8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 0000000002436240 RCX: 00007f8ea8bf0db7 RDX: 0000000000000000 RSI: 0000000000000800 RDI: 00000000024362a8 RBP: 0000000000000000 R08: 00007f8ea8eba060 R09: 00007f8ea8c658a0 R10: 00007ffcd38d2a60 R11: 0000000000000206 R12: 0000000000000000 R13: 0000000000000001 R14: 00000000024362a8 R15: 0000000000000000 irq event stamp: 4538 hardirqs last enabled at (4537): [<ffffffffb6193dde>] quarantine_put+0x9e/0x170 hardirqs last disabled at (4538): [<ffffffffb5a0556a>] trace_hardirqs_off_thunk+0x1a/0x20 softirqs last enabled at (4522): [<ffffffffb6f8ebe9>] sk_common_release+0x169/0x2d0 softirqs last disabled at (4520): [<ffffffffb6f8eb3e>] sk_common_release+0xbe/0x2d0 Check the return value of ip_vs_use_count_inc() and let its caller return proper error. Inside do_ip_vs_set_ctl() the module is already refcounted, we don't need refcount/derefcount there. Finally, in register_ip_vs_app() and start_sync_thread(), take the module refcount earlier and ensure it's released in the error path. Change since v1: - better return values in case of failure of ip_vs_use_count_inc(), thanks to Julian Anastasov - no need to increase/decrease the module refcount in ip_vs_set_ctl(), thanks to Julian Anastasov Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
[ Upstream commit 62931f5 ] if the IPVS module is removed while the sync daemon is starting, there is a small gap where try_module_get() might fail getting the refcount inside ip_vs_use_count_inc(). Then, the refcounts of IPVS module are unbalanced, and the subsequent call to stop_sync_thread() causes the following splat: WARNING: CPU: 0 PID: 4013 at kernel/module.c:1146 module_put.part.44+0x15b/0x290 Modules linked in: ip_vs(-) nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 veth ip6table_filter ip6_tables iptable_filter binfmt_misc intel_rapl_msr intel_rapl_common crct10dif_pclmul crc32_pclmul ext4 mbcache jbd2 ghash_clmulni_intel snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_nhlt snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper joydev pcspkr snd_timer virtio_balloon snd soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net net_failover virtio_blk failover virtio_console qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ata_piix ttm crc32c_intel serio_raw drm virtio_pci libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: nf_defrag_ipv6] CPU: 0 PID: 4013 Comm: modprobe Tainted: G W 5.4.0-rc1.upstream+ thesofproject#741 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:module_put.part.44+0x15b/0x290 Code: 04 25 28 00 00 00 0f 85 18 01 00 00 48 83 c4 68 5b 5d 41 5c 41 5d 41 5e 41 5f c3 89 44 24 28 83 e8 01 89 c5 0f 89 57 ff ff ff <0f> 0b e9 78 ff ff ff 65 8b 1d 67 83 26 4a 89 db be 08 00 00 00 48 RSP: 0018:ffff888050607c78 EFLAGS: 00010297 RAX: 0000000000000003 RBX: ffffffffc1420590 RCX: ffffffffb5db0ef9 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffffc1420590 RBP: 00000000ffffffff R08: fffffbfff82840b3 R09: fffffbfff82840b3 R10: 0000000000000001 R11: fffffbfff82840b2 R12: 1ffff1100a0c0f90 R13: ffffffffc1420200 R14: ffff88804f533300 R15: ffff88804f533ca0 FS: 00007f8ea9720740(0000) GS:ffff888053800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3245abe000 CR3: 000000004c28a006 CR4: 00000000001606f0 Call Trace: stop_sync_thread+0x3a3/0x7c0 [ip_vs] ip_vs_sync_net_cleanup+0x13/0x50 [ip_vs] ops_exit_list.isra.5+0x94/0x140 unregister_pernet_operations+0x29d/0x460 unregister_pernet_device+0x26/0x60 ip_vs_cleanup+0x11/0x38 [ip_vs] __x64_sys_delete_module+0x2d5/0x400 do_syscall_64+0xa5/0x4e0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f8ea8bf0db7 Code: 73 01 c3 48 8b 0d b9 80 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 89 80 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffcd38d2fe8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 0000000002436240 RCX: 00007f8ea8bf0db7 RDX: 0000000000000000 RSI: 0000000000000800 RDI: 00000000024362a8 RBP: 0000000000000000 R08: 00007f8ea8eba060 R09: 00007f8ea8c658a0 R10: 00007ffcd38d2a60 R11: 0000000000000206 R12: 0000000000000000 R13: 0000000000000001 R14: 00000000024362a8 R15: 0000000000000000 irq event stamp: 4538 hardirqs last enabled at (4537): [<ffffffffb6193dde>] quarantine_put+0x9e/0x170 hardirqs last disabled at (4538): [<ffffffffb5a0556a>] trace_hardirqs_off_thunk+0x1a/0x20 softirqs last enabled at (4522): [<ffffffffb6f8ebe9>] sk_common_release+0x169/0x2d0 softirqs last disabled at (4520): [<ffffffffb6f8eb3e>] sk_common_release+0xbe/0x2d0 Check the return value of ip_vs_use_count_inc() and let its caller return proper error. Inside do_ip_vs_set_ctl() the module is already refcounted, we don't need refcount/derefcount there. Finally, in register_ip_vs_app() and start_sync_thread(), take the module refcount earlier and ensure it's released in the error path. Change since v1: - better return values in case of failure of ip_vs_use_count_inc(), thanks to Julian Anastasov - no need to increase/decrease the module refcount in ip_vs_set_ctl(), thanks to Julian Anastasov Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, MCLK will be turned off in sof runtime suspended, and
it will go into runtime suspended right after playback is stop.
However, rt5682 will output static noise if sysclk turns off during
playback. Set ignore_pmdown_time to power down rt5682 immediately
and avoid the noise.
It can be removed once we can control MCLK by driver.
Signed-off-by: Bard liao yung-chuan.liao@linux.intel.com