[WHL] Entering suspend cause reboot platform #662

Activity

1. emilchudzik commented on Feb 19, 2019

   

   emilchudzik

   on Feb 19, 2019

   Author

   More actions

   I also checked using power button on platform - the same results.

   "Sleep" works on legacy kernel from ubuntu.
2. mengdonglin

   added

   bugSomething isn't workingSomething isn't working

   on Feb 20, 2019
3. xun2z commented on Feb 21, 2019

   

   xun2z

   on Feb 21, 2019

   Last edited by xun2z

   More actions

   I cannot reproduce this reboot issue using the same configuration.

   Test Env
   WHL RVP
   topic/cros-sof-v4.19: 8492020d5967
   sof: 2a86314
   topology: sof-cnl-nocodec.tplg

   Here is the part of dmesg when entering suspend

   [   68.491872] sof-audio-pci 0000:00:1f.3: ipc tx succeeded: 0x50010000: GLB_COMP_MSG: SET_VALUE
   [   68.491962] sof-audio-pci 0000:00:1f.3: ipc tx: 0x50010000: GLB_COMP_MSG: SET_VALUE
   [   68.492441] sof-audio-pci 0000:00:1f.3: ipc tx succeeded: 0x50010000: GLB_COMP_MSG: SET_VALUE
   [   68.492494] sof-audio-pci 0000:00:1f.3: ipc tx: 0x50010000: GLB_COMP_MSG: SET_VALUE
   [   68.493023] sof-audio-pci 0000:00:1f.3: ipc tx succeeded: 0x50010000: GLB_COMP_MSG: SET_VALUE
   [   68.493065] sof-audio-pci 0000:00:1f.3: ipc tx: 0x40020000: GLB_PM_MSG: CTX_RESTORE
   [   68.493253] sof-audio-pci 0000:00:1f.3: ipc tx succeeded: 0x40020000: GLB_PM_MSG: CTX_RESTORE
   [   68.493381] serial 00:06: activated
   [   68.635927] ata3: SATA link down (SStatus 4 SControl 300)
   [   68.725757] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
   [   68.986590] sof-audio-pci 0000:00:1f.3: ipc rx: 0x90020000: GLB_TRACE_MSG
   [   68.986671] sof-audio-pci 0000:00:1f.3: ipc rx done: 0x90020000: GLB_TRACE_MSG
   [   69.109761] atkbd serio0: Failed to enable keyboard on isa0060/serio0
   [   69.486550] sof-audio-pci 0000:00:1f.3: ipc rx: 0x90020000: GLB_TRACE_MSG
   [   69.486632] sof-audio-pci 0000:00:1f.3: ipc rx done: 0x90020000: GLB_TRACE_MSG
   [   70.390683] e1000e: enp0s31f6 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
   [   70.390687] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
   [   71.503766] HDMI HDA Codec ehdaudio0D2: hdac_hdmi_present_sense: disconnect for pin:port 5:0
   [   71.503771] HDMI HDA Codec ehdaudio0D2: hdac_hdmi_present_sense: disconnect for pin:port 6:0
   [   71.503775] HDMI HDA Codec ehdaudio0D2: hdac_hdmi_present_sense: disconnect for pin:port 7:0
   [   71.504732] acpi LNXPOWER:08: Turning OFF
   [   71.505517] acpi LNXPOWER:07: Turning OFF
   [   71.508407] OOM killer enabled.
   [   71.508409] Restarting tasks ... done.
   [   71.568960] video LNXVIDEO:00: Restoring backlight state
   [   71.568964] PM: suspend exit
   

   @emilchudzik can you paste the dmesg before you excute this command sudo rtcwake -m mem -s 2. Let's make sure there is no other issues.
4. emilchudzik commented on Feb 21, 2019

   

   emilchudzik

   on Feb 21, 2019

   Last edited by emilchudzik

   Author

   More actions

   Here is a dmesg dump before entering command, there is no error from audio part:
   dmesg_4.19.14-i2s-8492020d-nocodec.txt

   I check legacy kernel (default from Ubuntu 18) and Windows - for each od them platform going reboot instead of suspend, so it seems to be a platform specific issue.

   On another WHL RVP suspend/sleep works good. I think we can close this issue.
5. wenqingfu commented on Feb 22, 2019

   

   wenqingfu

   on Feb 22, 2019

   More actions

   On another WHL RVP suspend/sleep works good. I think we can close this issue.

   close per the comment
6. wenqingfu

   closed this as completedon Feb 22, 2019
7. marc-hb

   added

   suspend resumeIssues related to suspend resume (e.g. rtcwake)Issues related to suspend resume (e.g. rtcwake)

   on Jul 19, 2022