[BUG] No sound on HP Spectre x360 13-aw2022ur (2020, Tiger Lake) #2700

Activity

1. lgirdwood

   transferred this issue fromthesofproject/sofon Jan 18, 2021
2. hirnschmalz commented on Jan 19, 2021

   

   hirnschmalz

   on Jan 19, 2021

   More actions

   I can confirm this, same issue here on my HP Spectre x360 13-aw2777ng
3. juimonen commented on Jan 19, 2021

   

   juimonen

   on Jan 19, 2021

   More actions

   @bardliao @libinyang this seems to be soundwire device... any idea why we don't have pcm devices?
4. bardliao commented on Jan 19, 2021

   

   bardliao

   on Jan 19, 2021

   Collaborator

   More actions

   sof-audio-pci 0000:00:1f.3: No SoundWire machine driver found
   

   The issue is that SOF driver can't find a suitable machine driver for this device. The driver will look up eg. snd_soc_acpi_intel_cml_sdw_machines[] to find a suitable machine driver.
   So we have to add your device codec information to the corresponding acpi match table.
   Please add below to /etc/modprobe.d/sof-dyndbg.conf and attach the whole dmesg output here. Create one if you don't have this file on your device.

   options soundwire_bus dyndbg=+p
   options soundwire_intel dyndbg=+p
   

   And, please show me the result of lspci | grep '00:1f.3'

   Thanks
5. aigilea commented on Jan 19, 2021

   

   aigilea

   on Jan 19, 2021

   Last edited by aigilea

   Author

   More actions

   Attaching full dmesg with dyndbg.

   lspci | grep '00:1f.3'

   0000:00:1f.3 Multimedia audio controller: Intel Corporation Tiger Lake-LP Smart Sound Technology Audio Controller (rev 20)
   
6. hirnschmalz commented on Jan 19, 2021

   

   hirnschmalz

   on Jan 19, 2021

   More actions

   Here's my output of lspci | grep '00:1f.3'

   0000:00:1f.3 Multimedia audio controller: Intel Corporation Tiger Lake-LP Smart Sound Technology Audio Controller (rev 20)
   

   and my dmesg.
7. bardliao commented on Jan 19, 2021

   

   bardliao

   on Jan 19, 2021

   Collaborator

   More actions

   Attaching full dmesg with dyndbg.

   [    6.339077] soundwire sdw-master-0: Slave attached, programming device number
   [    6.339280] soundwire sdw-master-0: SDW Slave Addr: 20025d071100
   [    6.339281] soundwire sdw-master-0: SDW Slave class_id 0, part_id 711, mfg_id 25d, unique_id 0, version 2
   [    6.339306] soundwire sdw-master-0: Slave Entry not found
   [    6.339504] soundwire sdw-master-0: SDW Slave Addr: 20025d071100
   [    6.339506] soundwire sdw-master-0: SDW Slave class_id 0, part_id 711, mfg_id 25d, unique_id 0, version 2
   [    6.339583] soundwire sdw-master-1: Slave attached, programming device number
   [    6.339795] soundwire sdw-master-0: No more devices to enumerate
   [    6.339800] soundwire sdw-master-1: SDW Slave Addr: 20025d130800
   [    6.339806] soundwire sdw-master-1: SDW Slave class_id 0, part_id 1308, mfg_id 25d, unique_id 0, version 2
   [    6.339850] soundwire sdw-master-1: Slave Entry not found
   

   From above, the codecs on your device is rt711 and rt1308.
   But from below, your codec's information is not listed in the acpi table.

   [    6.231331] soundwire sdw-master-0: SDW Slave Addr: 10025d070100
   [    6.231334] soundwire sdw-master-0: SDW Slave class_id 0, part_id 701, mfg_id 25d, unique_id 0, version 1
   [    6.231350] soundwire sdw-master-0: SDW Slave Addr: 10025d070000
   [    6.231352] soundwire sdw-master-0: SDW Slave class_id 0, part_id 700, mfg_id 25d, unique_id 0, version 1
   [    6.231401] soundwire sdw-master-0: SDW Slave Addr: 10025d070000
   [    6.231402] soundwire sdw-master-0: SDW Slave class_id 0, part_id 700, mfg_id 25d, unique_id 0, version 1
   [    6.231405] soundwire sdw-master-0: SDW Slave Addr: 10025d070100
   [    6.231407] soundwire sdw-master-0: SDW Slave class_id 0, part_id 701, mfg_id 25d, unique_id 0, version 1
   [    6.231507] soundwire sdw-master-1: SDW Slave Addr: 110025d070100
   [    6.231508] soundwire sdw-master-1: SDW Slave class_id 0, part_id 701, mfg_id 25d, unique_id 0, version 1
   [    6.231518] soundwire sdw-master-1: SDW Slave Addr: 110025d070000
   [    6.231520] soundwire sdw-master-1: SDW Slave class_id 0, part_id 700, mfg_id 25d, unique_id 0, version 1
   [    6.231575] soundwire sdw-master-1: SDW Slave Addr: 110025d070000
   [    6.231577] soundwire sdw-master-1: SDW Slave class_id 0, part_id 700, mfg_id 25d, unique_id 0, version 1
   [    6.231585] soundwire sdw-master-1: SDW Slave Addr: 110025d070100
   [    6.231587] soundwire sdw-master-1: SDW Slave class_id 0, part_id 701, mfg_id 25d, unique_id 0, version 1
   

   So, we have to add the codec information to BIOS at first. We need to figure out who can help on it. @mengdonglin

   lspci | grep '00:1f.3'

   0000:00:1f.3 Multimedia audio controller: Intel Corporation Tiger Lake-LP Smart Sound Technology Audio Controller (rev 20)
   

   It is a TGL device and the match table is snd_soc_acpi_intel_tgl_sdw_machines[].
   Looking at the table, we don't have a matched table for your device (rt711 on link 0 and 1 rt1308 on link 1), but fortunately, we have a similar configuration tgl_rvp. We should be able to enable SoundWire on your device with slight modification.
   Below patch may help, but I have no chance to test it.

   diff --git a/sound/soc/intel/common/soc-acpi-intel-tgl-match.c b/sound/soc/intel/common/soc-acpi-intel-tgl-match.c
   index e3ddbf05bf72..529f40868ae9 100644
   --- a/sound/soc/intel/common/soc-acpi-intel-tgl-match.c
   +++ b/sound/soc/intel/common/soc-acpi-intel-tgl-match.c
   @@ -205,6 +205,20 @@ static const struct snd_soc_acpi_link_adr tgl_rvp[] = {
           {}
    };
   
   +static const struct snd_soc_acpi_link_adr tgl_rt711_rt1308[] = {
   +       {
   +               .mask = BIT(0),
   +               .num_adr = ARRAY_SIZE(rt711_0_adr),
   +               .adr_d = rt711_0_adr,
   +       },
   +       {
   +               .mask = BIT(1),
   +               .num_adr = ARRAY_SIZE(rt1308_1_single_adr),
   +               .adr_d = rt1308_1_single_adr,
   +       },
   +       {}
   +};
   +
    static const struct snd_soc_acpi_link_adr tgl_chromebook_base[] = {
           {
                   .mask = BIT(0),
   @@ -401,6 +415,12 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_tgl_sdw_machines[] = {
                   .drv_name = "sof_sdw",
                   .sof_tplg_filename = "sof-tgl-rt5682.tplg",
           },
   +       {
   +               .link_mask = 0x3, /* rt711 on link 0 and 1 rt1308s on link 1 */
   +               .links = tgl_rt711_rt1308,
   +               .drv_name = "sof_sdw",
   +               .sof_tplg_filename = "sof-tgl-rt711-rt1308.tplg",
   +       },
           {},
    };
    EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_tgl_sdw_machines);

   But, again, you have to fix the BIOS issue first. Alternative way is to add acpi table by yourself.
   You can follow the guide to add additional acpi table.
   A reference asl file is rtk_sdw_i2c.asl.
   You don't need the I2C part. What you need is to add rt711 and rt1308 address into Scope (_SB.PC00.HDAS.SNDW)

   Scope (_SB.PC00.HDAS.SNDW) {
   	Device (RTK0) // RT711 on link0
           {
               Name (_ADR, 0x000020025D071100)  // _ADR: Address
           }
   	Device (RTK1) // RT1308 on link1
           {
               Name (_ADR, 0x000120025D130800)  // _ADR: Address
           }
     
   
8. aigilea commented on Jan 19, 2021

   

   aigilea

   on Jan 19, 2021

   Last edited by aigilea

   Author

   More actions

   There's some progress.
   Now it looks better in dmesg, SOF initializes without errors, but the result is even stranger:
   ls /dev/snd

   seq  timer
   

   I'm attaching the new dmesg and just in case dsdt.

   upd.
   I've re-checked if maybe I've somehow messed the particular kernel build up, but no, removing just the acpi patch turns everything back to errors in dmesg and a few files in /dev/snd with the same patched kernel.
9. plbossart commented on Jan 19, 2021

   

   plbossart

   on Jan 19, 2021

   Member

   More actions

   @aigilea thanks for testing. Can you try to add dynamic debug to sof_sdw ? when the probe remains silent, it's usually that the machine driver probe fails, and unfortunately we have no way to report this at a higher level.
10. plbossart commented on Jan 19, 2021

    

    plbossart

    on Jan 19, 2021

    Member

    More actions

    @bardliao I am wondering if we shouldn't add a hack where we use the adr for 701 for either RT711 or RT1308. The BIOS is broken, and if we don't get a fix we should have an indirection to the 'right' devices.
11. aigilea commented on Jan 19, 2021

    

    aigilea

    on Jan 19, 2021

    Last edited by aigilea

    Author

    More actions

    @plbossart I've tried enabling dyndbg for sof_sdw.c, sof_sdw and sof_sdw* (but forgot to save that dmesg, I can redo this one if it may be useful). I haven't found any new information in dmesgs.
    I've enabled dyndbg via kernel options, this morning it worked that way with atkdb.c so I guess it's ok. If it's not, I can redo any other way.
12. plbossart

    added a commit that references this issue on Jan 19, 2021

    ASoC: soundwire: fix broken BIOS with _ADR workaround

    ...

    545ac28
13. plbossart commented on Jan 19, 2021

    

    plbossart

    on Jan 19, 2021

    Member

    More actions

    @aigilea to be honest none of us on the Intel Linux team knew of the existence of HP devices with SoundWire, but that's indeed a real product. We can't expect everyone to override the DSDT, that's too invasive.

    if you have spare cycles, can you try #2701 without the DSDT override? It should at least find the right devices but may fail later on.

    I still need to confirm if there are one or two amplifiers on the link1, in the first case we are missing a topology configuration for mono amplifier.
14. plbossart

    added a commit that references this issue on Jan 19, 2021

    ASoC: soundwire: fix broken BIOS with _ADR workaround

    ...

    077416a
15. plbossart commented on Jan 19, 2021

    

    plbossart

    on Jan 19, 2021

    Member

    More actions

    I've enabled dyndbg via kernel options, this morning it worked that way with atkdb.c so I guess it's ok. If it's not, I can redo any other way.

    You can enable dynamic debug by copying this file
    ddebug.txt as /etc/modprobe.d/sof-dyndbg.conf (reboot required after adding the file)/
16. 223 remaining items

    Load more

    Load more actions

17. ronohara commented on Jul 13, 2021

    

    ronohara

    on Jul 13, 2021

    More actions

    @plbossart I had installed the latest alsa-ucm-conf

    cd /root
    git clone https://github.com/alsa-project/alsa-ucm-conf.git

    BUT I got the link in /usr/share/alsa incorrect.
    cd /usr/share/alsa
    ls -la ucm2
    lrwxrwxrwx 1 root root 28 Apr 16 12:12 ucm2 -> /root/dev/alsa-ucm-conf/ucm2

    Corrected it with:
    rm /usr/share/alsa/ucm2
    ln -s /root/alsa-ucm-conf/ucm2 /usr/share/alsa/ucm2

    Rebooted - and there is a huge amount of activity from the kernel ...

    dmesg.txt https://pastebin.com/7ywNgKVK
    alsa-info https://pastebin.com/DVpAj1y9

    But still no sound.

    PS: Putting all this commentary in for posterity .. there is almost no documents or hints about setting up alsa-ucm-conf
18. plbossart commented on Jul 13, 2021

    

    plbossart

    on Jul 13, 2021

    Member

    More actions

    @ronohara you probably need to test the basics with command-line playback from a terminal

    alsaucm -c sof-soundwire set _verb HiFi set _enadev Speaker
    speaker-test -Dhw:0,2 -c2 -r48000

    alsaucm -c sof-soundwire set _verb HiFi set _enadev Mic
    arecord -Dhw:0,4 -c2 -r48000

    if you don't hear sound or don't see any activity on the record there is something wrong with your setup.
19. ronohara commented on Jul 13, 2021

    

    ronohara

    on Jul 13, 2021

    More actions

    @plbossart Interesting .... speaker-test works !!! plenty of 'pink noise' and left/right is distinct (I will worry about the Mic later)

    speaker-test 1.2.5.1

    Playback device is hw:0,2
    Stream parameters are 48000Hz, S16_LE, 2 channels
    Using 16 octaves of pink noise
    Rate set to 48000Hz (requested 48000Hz)
    Buffer size range from 96 to 16384
    Period size range from 48 to 4096
    Using max buffer size 16384
    Periods = 4
    was set period_size = 4096
    was set buffer_size = 16384
    0 - Front Left
    1 - Front Right
    Time per period = 5.631267
    0 - Front Left
    1 - Front Right
    Time per period = 5.973940
    0 - Front Left
    1 - Front Right
    Time per period = 1.792136

    But the Sound Control 'test' button does not work ... and applications using alsa don't work either.
20. plbossart commented on Jul 13, 2021

    

    plbossart

    on Jul 13, 2021

    Member

    More actions

    @ronohara I guess it's a problem with the UCM2 setup then, or PulseAudio not getting the right config.
21. ronohara commented on Aug 15, 2021

    

    ronohara

    on Aug 15, 2021

    Last edited by ronohara

    More actions

    @plobssart ... still no joy after upgrading alsa to 1.2.5 (lib, tools, utils) ... some traps for that. You need to remove the apt installed bits of alsa (1.2.2) before your compile /install from source, Otherwise some of the old version gets linked into the lib files.

    Upgraded to LM 20.2 as well.

    Status is: kernel 5.13 sees and uses the hardware just fine (dmesg.txt)... and alss-info shows all sorts of things as good.

    dmesg: https://pastebin.com/NXBrEMnJ
    alsa-info: https://pastebin.com/Yx4MK0yr

    The last line of alsa-info is weird:

    !!Packages installed
    !!--------------------

    rc alsa-utils 1.2.2-1ubuntu2.1 amd64 Utilities for configuring and using ALSA

    and yet using apt .. I get this...

    x360 tmp # apt remove alsa-utils
    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    Package 'alsa-utils' is not installed, so not removed
    0 to upgrade, 0 to newly install, 0 to remove and 1 not to upgrade.

    the Sound Control still does not deliver sound - but does see the sof-soundwire card and I have output hardware set to Stereo and Speakers

    When you put the test button on the sound control, the dmesg log shows the kernel nudges the card and the card says that it worked ok ..... which is also odd.

    As an example:
    [ 417.573278] sof-audio-pci-intel-tgl 0000:00:1f.3: pcm: trigger stream 0 dir 0 cmd 0
    [ 417.573281] sof-audio-pci-intel-tgl 0000:00:1f.3: ipc tx: 0x60050000
    [ 417.573429] sof-audio-pci-intel-tgl 0000:00:1f.3: ipc tx succeeded: 0x60050000
    [ 417.573440] sof-audio-pci-intel-tgl 0000:00:1f.3: FW Poll Status: reg=0x140000 successful
    [ 417.573443] sof-audio-pci-intel-tgl 0000:00:1f.3: ipc tx: 0x60030000
    [ 417.573595] sof-audio-pci-intel-tgl 0000:00:1f.3: ipc tx succeeded: 0x60030000
    [ 417.573621] sof-audio-pci-intel-tgl 0000:00:1f.3: pcm: free stream 0 dir 0
    [ 417.574315] rt711 sdw:0:25d:711:0: [rt711_sdw_write] 00e0 <= 0003
    [ 417.574398] rt711 sdw:0:25d:711:0: [rt711_sdw_write] 00f0 <= 0003
    [ 417.574402] rt711 sdw:0:25d:711:0: rt711_clock_config complete, clk_freq=4800000
    [ 417.574720] sof-audio-pci-intel-tgl 0000:00:1f.3: ipc tx: 0x80010000
    [ 417.574894] sof-audio-pci-intel-tgl 0000:00:1f.3: ipc tx succeeded: 0x80010000
    [ 417.574916] sof-audio-pci-intel-tgl 0000:00:1f.3: pcm: close stream 0 dir 0
22. plbossart commented on Aug 16, 2021

    

    plbossart

    on Aug 16, 2021

    Member

    More actions

    @ronohara maybe try removing/reinstalling libasound2-data. We've seen cases where bad mixer settings keep being used, and removing them helps.
23. ronohara commented on Aug 17, 2021

    

    ronohara

    on Aug 17, 2021

    More actions

    Hmm - apt purge libasound2-data ,,,, looks a bit dangerous

    The following packages will be REMOVED
    ant* ant-optional* antlr* antlr3* antlr3.2* aspectj* blender* blueberry* brasero* brasero-cdrkit* brltty* bsh*
    ca-certificates-java* celluloid* cheese* cup* default-jdk* default-jdk-headless* default-jre*
    default-jre-headless* dissenter-browser* evolution-data-server* ffmpeg* ffmpegthumbnailer* fop* gimp*
    gir1.2-gnomebluetooth-1.0* gnome-bluetooth* gnome-control-center* gnome-disk-utility* gnome-session-canberra*
    gnome-settings-daemon* gnome-video-effects-extra* gnome-video-effects-frei0r* google-chrome-stable*
    gstreamer1.0-alsa* gstreamer1.0-libav* gstreamer1.0-plugins-bad* hexchat* hypnotix* javacc* javahelp2* jlex*
    junit4* jython* k3b* k3b-extrathemes* kaccounts-integration* kaccounts-providers* kactivitymanagerd* kate*
    kcalc* kde-cli-tools* kde-config-cddb* kde-config-telepathy-accounts* kde-spectacle* kde-telepathy*
    kde-telepathy-approver* kde-telepathy-auth-handler* kde-telepathy-contact-list* kde-telepathy-desktop-applets*
    kde-telepathy-filetransfer-handler* kde-telepathy-integration-module* kde-telepathy-kpeople*
    kde-telepathy-minimal* kde-telepathy-send-file* kde-telepathy-text-ui* kdeconnect* keditbookmarks* khelpcenter*
    kinit* kio* konsole* konsole-kpart* kpackagelauncherqml* ktexteditor-katepart* libasound2* libasound2-data*
    libasound2-plugins* libatopology2* libavdevice58* libavfilter7* libbrasero-media3-1* libcanberra-gtk-module*
    libcanberra-gtk0* libcanberra-gtk3-0* libcanberra-gtk3-module* libcanberra-pulse* libcanberra0* libcheese-gtk25*
    libespeak-ng1* libexcalibur-logkit-java* libffmpegthumbnailer4v5* libflite1* libfluidsynth2* libfop-java*
    libgegl-0.4-0* libgeronimo-jms-1.1-spec-java* libgimp2.0* libgnome-bluetooth13* libgsound0* libk3b7*
    libk3b7-extracodecs* libkf5cddb5* libkf5declarative5* libkf5kcmutils5* libkf5khtml-bin* libkf5khtml5*
    libkf5newstuff5* libkf5newstuffcore5* libkf5notifications5* libkf5notifyconfig5* libkf5parts-plugins*
    libkf5parts5* libkf5plasma5* libkf5plasmaquick5* libkf5purpose-bin* libkf5purpose5* libkf5quickaddons5*
    libkf5runner5* libkf5texteditor5* libkf5wallet-bin* libkf5wallet5* libktpcommoninternals9* libktplogger9*
    libktpmodels9* libktpotr9* libktpwidgets9* libkwalletbackend5-5* libmarco-private2* libmatemixer0* libmpv1*
    libmsv-java* libnb-platform18-java* libopenal1* libpcaudio0* libqt5webenginecore5* libqt5webenginewidgets5*
    libreoffice-sdbc-hsqldb* libsdl-image1.2* libsdl1.2debian* libsdl2-2.0-0* libsndio7.0* libsox-fmt-all*
    libsox-fmt-alsa* libvisual-0.4-plugins* libxsltc-java* marco* mate-control-center* mate-media*
    mate-notification-daemon* mate-power-manager* mate-settings-daemon* mate-utils* meld* metacity*
    mint-meta-codecs* mint-meta-mate* mpg321* mplayer* nautilus-extension-brasero* onboard* openjdk-11-demo*
    openjdk-11-jdk* openjdk-11-jdk-headless* openjdk-11-jre* openjdk-11-jre-headless* openjdk-11-source*
    openjdk-14-demo* openjdk-14-jdk* openjdk-14-jdk-headless* openjdk-14-jre* openjdk-14-jre-headless*
    openjdk-14-source* orca* pavucontrol* phonon4qt5-backend-vlc* plasma-framework* plasma-runner-telepathy-contact*
    povray* povray-examples* povray-includes* pulseaudio* pulseaudio-module-bluetooth* pulseaudio-module-zeroconf*
    qml-module-org-kde-kconfig* qml-module-org-kde-kirigami2* qml-module-org-kde-kquickcontrols*
    qml-module-org-kde-kquickcontrolsaddons* qml-module-org-kde-newstuff* qml-module-org-kde-purpose*
    qml-module-org-kde-runnermodel* qml-module-org-kde-telepathy* rhino* signal-desktop* signon-kwallet-extension*
    slick-greeter* speech-dispatcher* speech-dispatcher-audio-plugins* speech-dispatcher-espeak-ng*
    tumbler-plugins-extra* vim* vim-julia* visualvm* vlc* vlc-plugin-base*
    The following NEW packages will be installed
    notification-daemon
    0 to upgrade, 1 to newly install, 206 to remove and 1 not to upgrade.
    Need to get 37.0 kB of archives.
    After this operation, 2,437 MB disk space will be freed.
    Do you want to continue? [Y/n]
24. ronohara commented on Aug 17, 2021

    

    ronohara

    on Aug 17, 2021

    More actions

    And alsamixer now has a library problem. Looks like I might have to compile quite a bit from source to get the 1.2.5 alsa support working.

    360 tmp # alsamixer
    ALSA lib dlmisc.c:170:(snd_dlsym_verify) unable to verify version for symbol snd_func_private_integer
    ALSA lib conf.c:4720:(_snd_config_evaluate) symbol snd_func_private_integer is not defined inside (null)
    ALSA lib conf.c:5220:(snd_config_expand) Evaluate error: No such device or address
    ALSA lib conf.c:3858:(snd_config_hook_load) Unable to expand filenames in the pre-load section
    ALSA lib conf.c:3736:(snd_config_hooks_call) function snd_config_hook_load_for_all_cards returned error: No such device or address
    ALSA lib control.c:1268:(snd_ctl_open_conf) Invalid type for CTL default definition
    cannot open mixer: Invalid argument
    x360 tmp #
25. JonAnCla commented on Aug 31, 2021

    

    JonAnCla

    on Aug 31, 2021

    More actions

    Hey @ronohara, in case it helps, I was able to build .deb files for alsa 1.2.5.1 from the debian sources for the future "sid" release for the following:

    • alsa-lib
    • alsa-utils
    • alsa-topology-conf
    • alsa-ucm-conf

    (libasound is part of alsa-lib)

    You can download the debian source bundles for these here, e.g. here's the one for alsa-lib
    https://launchpad.net/debian/sid/+source/alsa-lib

    you can then build the deb files from these sources using:
    dpkg-buildpackage -rfakeroot -uc -us --build=binary -d

    (you will also need to install build dependencies but you probably have these already)

    That way you can easily install the 1.2.5.1 debs or got back to an older version using apt or dpkg

    However, even after doing all of this and using a 5.13 kernel, I am not able to get sound when I cold boot my system (linux mint 20 based on ubuntu 20.04)

    Will follow up separately with logs & further questions
26. plbossart commented on Oct 5, 2021

    

    plbossart

    on Oct 5, 2021

    Member

    More actions

    The jack detection doesn't seem to work on these HP x360 convertible devices, I added PR #3195 after local tests on a device. That helps with the ALSA mixer controls. I did find one case where the headset was not detected but that's not super reliable anyways. remove-insert forced the detection alright.

    Changing the device with the Gnome settings remains broken, something's not working between PipeWire, Gnome Settings and possibly UCM. @perexg FYI.

    The rest seems to work fine on Fedora 34 with the 5.14.9 kernel. speaker, local mics, headphones, headset record audio with decent levels.

    👍React with 👍1Reacted by H.F.
27. sboyanex

    added a commit that references this issue on Aug 2, 2022

    UPSTREAM: soundwire: Intel: introduce DMI quirks for HP Spectre x360 …

    ...

    f2ef053
28. sboyanex

    added a commit that references this issue on Aug 26, 2022

    UPSTREAM: soundwire: Intel: introduce DMI quirks for HP Spectre x360 …

    ...

    e029b36
29. fkjbvfdvbnfdkjvbjfhd

    added a commit that references this issue on May 18, 2026

    ASoC: Intel: sof_sdw: add quirk for HP Spectre x360 convertible

    ...

    6350d0b
30. nekoshirro

    added a commit that references this issue on Jun 14, 2026

    ASoC: Intel: sof_sdw: add quirk for HP Spectre x360 convertible

    ...

    bf34752
31. anlogic-ss-infra-bot

    added a commit that references this issue on Oct 17, 2026

    ASoC: Intel: sof_sdw: add quirk for HP Spectre x360 convertible

    ...

    2c8cffa