A designer for two-part, twist-lock, Bambu AMS-compatible filament spools that hold refill coils. Tweak the parameters, watch a live 3D preview, and download print-ready STL or 3MF files.
- Two halves that twist-lock together around a refill coil, sized for AMS-compatible dimensions (200 mm flange, 53 mm bore by default)
- Defaults: honeycomb pattern in lightweight mode, with the label panel and the remaining-filament gauge off (turn them on under Personalize and Extras)
- Thin-walled tube core (3 mm) with a short bore collar on each flange, printable without supports
- Refill presets (Bambu Lab refill, custom coil dimensions) with coil clearance and lock clearance settings
- Flange patterns: honeycomb, spokes, voronoi, holes, isogrid, windows (large open sectors between radial ribs), or none, with density and seed
- Lightweight mode that thins the flange webs and narrows their solid rim and hub ring
- Engraved label outline with custom text
- Filament gauge ticks by material
- Filament clip hole pairs (weave the filament end down through one hole and back up the other) and an optional NFC tag pocket (for tracking with a phone; the AMS does not read it)
- Live three.js preview with an animated exploded view, a slicer-like filament estimate, fit stats, STL per half or a combined 3MF
- "Open in Bambu Studio": a Bambu Studio project with each half on its own plate
uv sync && uv run spoolmaker
Then open http://127.0.0.1:5000. Set the PORT environment variable to use another port.
To run Spool Maker on a server (container image, reverse proxy, hosting under a sub-path like /spool/), see DEPLOYING.md.
uv run pytest
Tests that slice with a locally installed Bambu Studio (macOS, slow) are skipped unless you opt in:
SPOOLMAKER_BAMBU_LIVE=1 uv run pytest
- Print each half flange-down, with no supports. The STLs are already in print pose.
- The 200 mm flange needs a bed of at least 200 mm. It will not fit on an A1 mini.
- If the halves are too tight or too loose when twisting together, adjust the twist-lock clearance setting and reprint.
- The Bambu refill preset dimensions are community-sourced, not from an official spec. Measure your coil and use the custom preset if they differ.
Spool Maker is licensed under the GNU Affero General Public License v3.0 only (AGPL-3.0-only); see LICENSE.
The Bambu Studio project settings in src/spoolmaker/bambu/templates/ are derived from the Bambu Studio 02.08.04.61 system profiles, which are AGPL-3.0 licensed (bambulab/BambuStudio).