Skip to content
Merged
Show file tree
Hide file tree
Changes from all commits
Commits
File filter

Filter by extension

Filter by extension

Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
2 changes: 1 addition & 1 deletion platformio.ini
Original file line number Diff line number Diff line change
Expand Up @@ -96,7 +96,7 @@ build_flags = ${arduino_base.build_flags}
lib_deps =
${arduino_base.lib_deps}
https://github.com/oltaco/CustomLFS#0.2.3
; ----------------- RP2040 ---------------------
; ------------- RP2040 / RP2350 -----------------

[rp2040_base]
extends = arduino_base
Expand Down
30 changes: 30 additions & 0 deletions variants/rpi_pico2/RpiPico2Board.cpp
Original file line number Diff line number Diff line change
@@ -0,0 +1,30 @@
#include "RpiPico2Board.h"

#include <Arduino.h>
#include <Wire.h>

void RpiPico2Board::begin() {
// for future use, sub-classes SHOULD call this from their begin()
startup_reason = BD_STARTUP_NORMAL;

#ifdef P_LORA_TX_LED
pinMode(P_LORA_TX_LED, OUTPUT);
#endif

#ifdef PIN_VBAT_READ
pinMode(PIN_VBAT_READ, INPUT);
#endif

#if defined(PIN_BOARD_SDA) && defined(PIN_BOARD_SCL)
Wire.setSDA(PIN_BOARD_SDA);
Wire.setSCL(PIN_BOARD_SCL);
#endif

Wire.begin();

delay(10); // give sx1262 some time to power up
}

bool RpiPico2Board::startOTAUpdate(const char *id, char reply[]) {
return false;
}
63 changes: 63 additions & 0 deletions variants/rpi_pico2/RpiPico2Board.h
Original file line number Diff line number Diff line change
@@ -0,0 +1,63 @@
#pragma once

#include <Arduino.h>
#include <MeshCore.h>
#include <helpers/KeyValueStore.h>

/*
* This board has no built-in way to read battery voltage.
* Nevertheless it's very easy to make it work, you only require two 1% resistors.
* If your using the WIO SX1262 Addon for xaio, make sure you dont connect D0!
*
* BAT+ -----+
* |
* VSYS --+ -/\/\/\/\- --+
* 200k |
* +-- D0
* |
* GND --+ -/\/\/\/\- --+
* | 100k
* BAT- -----+
*/
#define PIN_VBAT_READ 26 // D0
#define BATTERY_SAMPLES 8
#define ADC_MULTIPLIER (3.0f * 3.3f * 1000)

class RpiPico2Board : public mesh::MainBoard {
protected:
uint8_t startup_reason;

public:
void begin();
uint8_t getStartupReason() const override { return startup_reason; }

void attachDynamicPrefs(KeyValueStore* prefs) { } // no-op

#ifdef P_LORA_TX_LED
void onBeforeTransmit() override { digitalWrite(P_LORA_TX_LED, HIGH); }
void onAfterTransmit() override { digitalWrite(P_LORA_TX_LED, LOW); }
#endif


uint16_t getBattMilliVolts() override {
#if defined(PIN_VBAT_READ) && defined(ADC_MULTIPLIER)
analogReadResolution(12);

uint32_t raw = 0;
for (int i = 0; i < BATTERY_SAMPLES; i++) {
raw += analogRead(PIN_VBAT_READ);
}
raw = raw / BATTERY_SAMPLES;

return (ADC_MULTIPLIER * raw) / 4096;
#else
return 0;
#endif
}

const char *getManufacturerName() const override { return "RpiPico2"; }

void reboot() override { rp2040.reboot(); }

bool startOTAUpdate(const char *id, char reply[]) override;
};
120 changes: 120 additions & 0 deletions variants/rpi_pico2/platformio.ini
Original file line number Diff line number Diff line change
@@ -0,0 +1,120 @@
[rpi_pico2]
extends = rp2040_base
board = rpipico2
board_build.filesystem_size = 0.5m
build_flags = ${rp2040_base.build_flags}
-I variants/rpi_pico2
-D SX126X_CURRENT_LIMIT=140
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D P_LORA_DIO_1=20
-D P_LORA_NSS=3
-D P_LORA_RESET=15
-D P_LORA_BUSY=2
-D P_LORA_SCLK=10
-D P_LORA_MOSI=11
-D P_LORA_MISO=12
-D P_LORA_TX_LED=25
-D SX126X_RXEN=RADIOLIB_NC
-D SX126X_TXEN=RADIOLIB_NC
-D SX126X_DIO2_AS_RF_SWITCH=true
-D SX126X_DIO3_TCXO_VOLTAGE=1.8
-D SX126X_RX_BOOSTED_GAIN=1
-D LORA_TX_POWER=22
; Debug options
; -D DEBUG_RP2040_WIRE=1
; -D DEBUG_RP2040_SPI=1
; -D DEBUG_RP2040_CORE=1
; -D RADIOLIB_DEBUG_SPI=1
; -D DEBUG_RP2040_PORT=Serial
build_src_filter = ${rp2040_base.build_src_filter}
+<RpiPico2Board.cpp>
+<../variants/rpi_pico2>
lib_deps = ${rp2040_base.lib_deps}

[env:rpi_pico2_repeater]
extends = rpi_pico2
build_flags = ${rpi_pico2.build_flags}
-D ADVERT_NAME='"Pico2 Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${rpi_pico2.build_src_filter}
+<../examples/simple_repeater>

[env:rpi_pico2_room_server]
extends = rpi_pico2
build_flags = ${rpi_pico2.build_flags}
-D ADVERT_NAME='"Pico2 Room"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ROOM_PASSWORD='"hello"'
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${rpi_pico2.build_src_filter}
+<../examples/simple_room_server>

[env:rpi_pico2_companion_radio_usb]
extends = rpi_pico2
build_flags = ${rpi_pico2.build_flags}
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D ENABLE_USB_INTERFACE
; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1
; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1
build_src_filter = ${rpi_pico2.build_src_filter}
+<../examples/companion_radio/*.cpp>
lib_deps = ${rpi_pico2.lib_deps}
densaugeo/base64 @ ~1.4.0
lib_ignore = BLE

; [env:rpi_pico2_companion_radio_ble]
; extends = rpi_pico2
; build_flags = ${rpi_pico2.build_flags}
; -D MAX_CONTACTS=100
; -D MAX_GROUP_CHANNELS=8
; -D BLE_PIN_CODE=123456
; -D BLE_DEBUG_LOGGING=1
; ; -D MESH_PACKET_LOGGING=1
; ; -D MESH_DEBUG=1
; build_src_filter = ${rpi_pico2.build_src_filter}
; +<../examples/companion_radio/*.cpp>
; lib_deps = ${rpi_pico2.lib_deps}
; densaugeo/base64 @ ~1.4.0

; [env:rpi_pico2_companion_radio_wifi]
; extends = rpi_pico2
; build_flags = ${rpi_pico2.build_flags}
; -D MAX_CONTACTS=100
; -D MAX_GROUP_CHANNELS=8
; -D WIFI_DEBUG_LOGGING=1
; -D WIFI_SSID='"myssid"'
; -D WIFI_PWD='"mypwd"'
; ; -D MESH_PACKET_LOGGING=1
; ; -D MESH_DEBUG=1
; build_src_filter = ${rpi_pico2.build_src_filter}
; +<../examples/companion_radio/*.cpp>
; lib_deps = ${rpi_pico2.lib_deps}
; densaugeo/base64 @ ~1.4.0

[env:rpi_pico2_terminal_chat]
extends = rpi_pico2
build_flags = ${rpi_pico2.build_flags}
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${rpi_pico2.build_src_filter}
+<../examples/simple_secure_chat/main.cpp>
lib_deps = ${rpi_pico2.lib_deps}
densaugeo/base64 @ ~1.4.0

[env:rpi_pico2_kiss_modem]
extends = rpi_pico2
build_src_filter = ${rpi_pico2.build_src_filter}
+<../examples/kiss_modem/>
30 changes: 30 additions & 0 deletions variants/rpi_pico2/target.cpp
Original file line number Diff line number Diff line change
@@ -0,0 +1,30 @@
#include "target.h"

#include <Arduino.h>
#include <helpers/ArduinoHelpers.h>

RpiPico2Board board;

RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI1);

WRAPPER_CLASS radio_driver(radio, board);

VolatileRTCClock fallback_clock;
AutoDiscoverRTCClock rtc_clock(fallback_clock);
SensorManager sensors;

#ifndef LORA_CR
#define LORA_CR 5
#endif

bool radio_init() {
rtc_clock.begin(Wire);

return radio.std_init(&SPI1);
}

mesh::LocalIdentity radio_new_identity() {
RadioNoiseListener rng(radio);
return mesh::LocalIdentity(&rng); // create new random identity
}

19 changes: 19 additions & 0 deletions variants/rpi_pico2/target.h
Original file line number Diff line number Diff line change
@@ -0,0 +1,19 @@
#pragma once

#define RADIOLIB_STATIC_ONLY 1

#include <RadioLib.h>
#include <helpers/AutoDiscoverRTCClock.h>
#include <helpers/radiolib/CustomSX1262Wrapper.h>
#include <helpers/radiolib/RadioLibWrappers.h>
#include <helpers/SensorManager.h>
#include <RpiPico2Board.h>

extern RpiPico2Board board;
extern WRAPPER_CLASS radio_driver;
extern AutoDiscoverRTCClock rtc_clock;
extern SensorManager sensors;

bool radio_init();
mesh::LocalIdentity radio_new_identity();