Skip to content

Releases

ArduinoNRF 0.4.2

Choose a tag to compare

@dunknowcoding dunknowcoding released this 21 Aug 16:03

ArduinoNRF 0.4.2 hardens USB lifecycle and upload safety across the supported nRF52 layouts.

Highlights:

  • Makes serial DFU single-attempt and identity-bound, with bounded discovery, transfer, cleanup, and runtime-return checks.
  • Strengthens Windows, Linux, and macOS endpoint attribution and rejects ambiguous or stale upload targets.
  • Fixes nRF52840 USB address handoff, reset/configuration state, suspend/VBUS lifecycle, CDC backpressure, and wrap-safe timing.
  • Adds bounded, transactional pluggable USB control-IN and control-OUT handling.
  • Validates application vectors, memory bounds, bootloader metadata, and debugger command inputs before mutation.

The packaged core passed the complete local 22-layout compile/preflight matrix and a clean archive-install compile.

ArduinoNRF 0.4.1

Choose a tag to compare

@dunknowcoding dunknowcoding released this 21 Aug 01:42

USB and upload safety release:

  • Preserves enumeration and 1200-bps recovery across idle, suspend, non-yielding sketches, and default low-power calls.
  • Validates Intel HEX integrity, vector tables, flash origin, and image bounds before any USB access.
  • Adds exact SoftDevice/no-SoftDevice layouts and corrected upstream board identities.
  • Hardens single-cable GDB attach and upload while halted.
  • Keeps debugger load segments inside the selected application partition.

Validated on physical nRF52840 hardware and across the local board/layout compile matrix. The attached archive was installed and compiled from an isolated sketchbook before publication.

ArduinoNRF 0.4.0

Choose a tag to compare

@dunknowcoding dunknowcoding released this 20 Aug 21:28
  • Rebuild TaichiUSB endpoint/DMA/ACK handling for reliable enumeration, dual CDC traffic, DFU touch, and USB GDB coexistence.
  • Harden identity-scoped uploads on Windows, Linux, and macOS, including automatic same-device USER-to-SERVICE CDC resolution and bounded recovery.
  • Correct every documented nRF52840 bootloader layout, Nordic PCA10059 transport, linker/storage bounds, and fail-closed auto-detection.
  • Remove duplicate Arduino upload waits and redundant uploader logic; retain the physically verified 115200-baud DFU rate.
  • Verified on SoftDevice and non-SoftDevice ProMicro-class targets with repeated upload, exact duplex traffic, busy CDC/debug handles, and debugger attach/step.

ArduinoNRF 0.3.15

Choose a tag to compare

@dunknowcoding dunknowcoding released this 17 Aug 21:11
  • Harden identity-scoped USB, UF2, and serial-DFU uploads across Windows, Linux, and macOS.
  • Verify the selected board returns with its declared runtime USB identity after transfer.
  • Prevent duplicate Arduino CLI 1200-baud touches and cross-board upload races.
  • Fix distinct-PID UF2 transitions so the uploader never waits for runtime COM before copying firmware.
  • Carry forward nRF52840 USB lifecycle and CDC transfer fixes.
  • Remove machine-specific validation data from public release content.

ArduinoNRF 0.3.14

Choose a tag to compare

@dunknowcoding dunknowcoding released this 28 Jul 21:25

Fixes automatic upload for no-SoftDevice ProMicro-class clone bootloaders that share the ambiguous 239A:00B3 identity. Auto mode now enters the selected bootloader and reads INFO_UF2.TXT before deciding the application layout. Hardware verified with a no-SoftDevice 0x1000 upload and automatic return to the runtime serial port.

ArduinoNRF 0.3.13

Choose a tag to compare

@dunknowcoding dunknowcoding released this 28 Jul 18:18

Fixed

  • Accept working Python 3 launchers provided through Windows App Execution Aliases.
  • Verify every Python candidate before use and continue past invalid overrides.
  • Discover standard per-user Python installations, py -3, and Conda without machine-specific paths.
  • Improve UF2 conversion troubleshooting guidance.

This release fixes #3.

ArduinoNRF 0.3.12

Choose a tag to compare

@dunknowcoding dunknowcoding released this 28 Jul 11:56

Patch release for reliable ProMicro nRF52840 USB handoff.

  • Keeps application PID distinct from the UF2 bootloader PID to prevent composite-interface driver binding conflicts.
  • Accepts a returned or Windows-remapped runtime COM after serial DFU instead of reporting a successful flash as failed.
  • Covers SoftDevice and no-SoftDevice ProMicro layouts.

ArduinoNRF 0.3.11

Choose a tag to compare

@dunknowcoding dunknowcoding released this 16 Jun 20:59
  • Add WSL2 usbipd attach support and WSL1 COM-port fallback docs for the official nCS Zigbee NCP Host helper.
  • Add bounded host validation runs with -RunSeconds.
  • Record board1 transport validation: WSL1 opens COM27 as /dev/ttyS27 and simple_gw transmits NCP frames, but the current board1 firmware does not return the low-level ACK yet.

ArduinoNRF 0.3.10

Choose a tag to compare

@dunknowcoding dunknowcoding released this 16 Jun 20:27
  • Add WSL/Ubuntu bootstrap diagnostics for the official nCS Zigbee NCP Host helper.
  • Document the current board1 NCP Host validation blocker: WSL optional component missing or pending reboot.
  • Publish ArduinoNRF 0.3.10 package index metadata.

ArduinoNRF 0.3.9

Choose a tag to compare

@dunknowcoding dunknowcoding released this 16 Jun 20:18
  • Add nCS Zigbee NCP Host helper for preparing Nordic's official ncp_host_v3.6.0 package.
  • Document COM27 to /dev/ttyS27 WSL mapping and simple_gw launch path.
  • Record board1 reflash back to the no-SoftDevice Zigbee NCP USB baseline.
  • Confirm current blocker: local Ubuntu/WSL distro is not available, so official host protocol validation is pending.