@@ -18,6 +18,7 @@ properties:
     enum:
       - fsl,imx8mm-micfil
       - fsl,imx8mp-micfil
+      - fsl,imx93-micfil
 
   reg:
     maxItems: 1
 
@@ -37,15 +37,11 @@ properties:
     items:
       - description: AIC clock
       - description: I2S clock
-      - description: EXT clock
-      - description: PLL/2 clock
 
   clock-names:
     items:
       - const: aic
       - const: i2s
-      - const: ext
-      - const: pll half
 
   dmas:
     items:
@@ -82,10 +78,8 @@ examples:
       interrupts = <18>;
 
       clocks = <&cgu JZ4740_CLK_AIC>,
-               <&cgu JZ4740_CLK_I2S>,
-               <&cgu JZ4740_CLK_EXT>,
-               <&cgu JZ4740_CLK_PLL_HALF>;
-      clock-names = "aic", "i2s", "ext", "pll half";
+               <&cgu JZ4740_CLK_I2S>;
+      clock-names = "aic", "i2s";
 
       dmas = <&dmac 25 0xffffffff>, <&dmac 24 0xffffffff>;
       dma-names = "rx", "tx";
 
@@ -21,6 +21,13 @@ properties:
     $ref: "/schemas/types.yaml#/definitions/phandle"
     description: The phandle of MT8186 ASoC platform.
 
+  dmic-gpios:
+    maxItems: 1
+    description:
+      dmic-gpios optional prop for switching between two DMICs.
+      Ex, the GPIO can control a MUX HW component to select
+      dmic clk and data form a Front or Rear dmic.
+
   headset-codec:
     type: object
     additionalProperties: false
@@ -63,14 +70,19 @@ required:
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
 
     sound: mt8186-sound {
         compatible = "mediatek,mt8186-mt6366-rt1019-rt5682s-sound";
         mediatek,platform = <&afe>;
         pinctrl-names = "aud_clk_mosi_off",
-                        "aud_clk_mosi_on";
+                        "aud_clk_mosi_on",
+                        "aud_gpio_dmic_sec";
         pinctrl-0 = <&aud_clk_mosi_off>;
         pinctrl-1 = <&aud_clk_mosi_on>;
+        pinctrl-2 = <&aud_gpio_dmic_sec>;
+
+        dmic-gpios = <&pio 23 GPIO_ACTIVE_HIGH>;
 
         headset-codec {
             sound-dai = <&rt5682s>;
 
@@ -90,11 +90,29 @@ properties:
   "#sound-dai-cells":
     const: 1
 
+  AVDD-supply:
+    description: Regulator supplying analog power through the AVDD pin.
+
+  MICVDD-supply:
+    description: Regulator supplying power for the microphone bias through the
+      MICVDD pin.
+
+  DBVDD-supply:
+    description: Regulator supplying I/O power through the DBVDD pin.
+
+  LDO1-IN-supply:
+    description: Regulator supplying power to the digital core and charge pump
+      through the LDO1_IN pin.
+
 additionalProperties: false
 
 required:
   - compatible
   - reg
+  - AVDD-supply
+  - MICVDD-supply
+  - DBVDD-supply
+  - LDO1-IN-supply
 
 examples:
   - |
@@ -120,5 +138,10 @@ examples:
 
             clocks = <&osc>;
             clock-names = "mclk";
+
+            AVDD-supply = <&avdd_reg>;
+            MICVDD-supply = <&micvdd_reg>;
+            DBVDD-supply = <&dbvdd_reg>;
+            LDO1-IN-supply = <&ldo1_in_reg>;
         };
     };
@@ -8,6 +8,21 @@ Required properties:
 
 - reg : The I2C address of the device.
 
+- AVDD-supply: phandle to the regulator supplying analog power through the
+  AVDD pin
+
+- MICVDD-supply: phandle to the regulator supplying power for the microphone
+  bias through the MICVDD pin. Either MICVDD or VBAT should be present.
+
+- VBAT-supply: phandle to the regulator supplying battery power through the
+  VBAT pin. Either MICVDD or VBAT should be present.
+
+- DBVDD-supply: phandle to the regulator supplying I/O power through the DBVDD
+  pin.
+
+- LDO1-IN-supply: phandle to the regulator supplying power to the digital core
+  and charge pump through the LDO1_IN pin.
+
 Optional properties:
 
 - interrupts : The CODEC's interrupt output.
@@ -75,4 +90,9 @@ rt5682 {
 
 	clocks = <&osc>;
 	clock-names = "mclk";
+
+	AVDD-supply = <&avdd_reg>;
+	MICVDD-supply = <&micvdd_reg>;
+	DBVDD-supply = <&dbvdd_reg>;
+	LDO1-IN-supply = <&ldo1_in_reg>;
 };