diff --git a/platformio.ini b/platformio.ini index f296f838213..929edf77844 100644 --- a/platformio.ini +++ b/platformio.ini @@ -96,7 +96,7 @@ build_flags = ${arduino_base.build_flags} lib_deps = ${arduino_base.lib_deps} https://github.com/oltaco/CustomLFS#0.2.3 -; ----------------- RP2040 --------------------- +; ------------- RP2040 / RP2350 ----------------- [rp2040_base] extends = arduino_base diff --git a/variants/rpi_pico2/RpiPico2Board.cpp b/variants/rpi_pico2/RpiPico2Board.cpp new file mode 100644 index 00000000000..f5e33971a8b --- /dev/null +++ b/variants/rpi_pico2/RpiPico2Board.cpp @@ -0,0 +1,30 @@ +#include "RpiPico2Board.h" + +#include +#include + +void RpiPico2Board::begin() { + // for future use, sub-classes SHOULD call this from their begin() + startup_reason = BD_STARTUP_NORMAL; + +#ifdef P_LORA_TX_LED + pinMode(P_LORA_TX_LED, OUTPUT); +#endif + +#ifdef PIN_VBAT_READ + pinMode(PIN_VBAT_READ, INPUT); +#endif + +#if defined(PIN_BOARD_SDA) && defined(PIN_BOARD_SCL) + Wire.setSDA(PIN_BOARD_SDA); + Wire.setSCL(PIN_BOARD_SCL); +#endif + + Wire.begin(); + + delay(10); // give sx1262 some time to power up +} + +bool RpiPico2Board::startOTAUpdate(const char *id, char reply[]) { + return false; +} diff --git a/variants/rpi_pico2/RpiPico2Board.h b/variants/rpi_pico2/RpiPico2Board.h new file mode 100644 index 00000000000..398c38c6778 --- /dev/null +++ b/variants/rpi_pico2/RpiPico2Board.h @@ -0,0 +1,63 @@ +#pragma once + +#include +#include +#include + +/* + * This board has no built-in way to read battery voltage. + * Nevertheless it's very easy to make it work, you only require two 1% resistors. + * If your using the WIO SX1262 Addon for xaio, make sure you dont connect D0! + * + * BAT+ -----+ + * | + * VSYS --+ -/\/\/\/\- --+ + * 200k | + * +-- D0 + * | + * GND --+ -/\/\/\/\- --+ + * | 100k + * BAT- -----+ + */ +#define PIN_VBAT_READ 26 // D0 +#define BATTERY_SAMPLES 8 +#define ADC_MULTIPLIER (3.0f * 3.3f * 1000) + +class RpiPico2Board : public mesh::MainBoard { +protected: + uint8_t startup_reason; + +public: + void begin(); + uint8_t getStartupReason() const override { return startup_reason; } + + void attachDynamicPrefs(KeyValueStore* prefs) { } // no-op + +#ifdef P_LORA_TX_LED + void onBeforeTransmit() override { digitalWrite(P_LORA_TX_LED, HIGH); } + void onAfterTransmit() override { digitalWrite(P_LORA_TX_LED, LOW); } +#endif + + + uint16_t getBattMilliVolts() override { +#if defined(PIN_VBAT_READ) && defined(ADC_MULTIPLIER) + analogReadResolution(12); + + uint32_t raw = 0; + for (int i = 0; i < BATTERY_SAMPLES; i++) { + raw += analogRead(PIN_VBAT_READ); + } + raw = raw / BATTERY_SAMPLES; + + return (ADC_MULTIPLIER * raw) / 4096; +#else + return 0; +#endif + } + + const char *getManufacturerName() const override { return "RpiPico2"; } + + void reboot() override { rp2040.reboot(); } + + bool startOTAUpdate(const char *id, char reply[]) override; +}; diff --git a/variants/rpi_pico2/platformio.ini b/variants/rpi_pico2/platformio.ini new file mode 100644 index 00000000000..fbf47e169ce --- /dev/null +++ b/variants/rpi_pico2/platformio.ini @@ -0,0 +1,120 @@ +[rpi_pico2] +extends = rp2040_base +board = rpipico2 +board_build.filesystem_size = 0.5m +build_flags = ${rp2040_base.build_flags} + -I variants/rpi_pico2 + -D SX126X_CURRENT_LIMIT=140 + -D USE_SX1262 + -D RADIO_CLASS=CustomSX1262 + -D WRAPPER_CLASS=CustomSX1262Wrapper + -D P_LORA_DIO_1=20 + -D P_LORA_NSS=3 + -D P_LORA_RESET=15 + -D P_LORA_BUSY=2 + -D P_LORA_SCLK=10 + -D P_LORA_MOSI=11 + -D P_LORA_MISO=12 + -D P_LORA_TX_LED=25 + -D SX126X_RXEN=RADIOLIB_NC + -D SX126X_TXEN=RADIOLIB_NC + -D SX126X_DIO2_AS_RF_SWITCH=true + -D SX126X_DIO3_TCXO_VOLTAGE=1.8 + -D SX126X_RX_BOOSTED_GAIN=1 + -D LORA_TX_POWER=22 +; Debug options + ; -D DEBUG_RP2040_WIRE=1 + ; -D DEBUG_RP2040_SPI=1 + ; -D DEBUG_RP2040_CORE=1 + ; -D RADIOLIB_DEBUG_SPI=1 + ; -D DEBUG_RP2040_PORT=Serial +build_src_filter = ${rp2040_base.build_src_filter} + + + +<../variants/rpi_pico2> +lib_deps = ${rp2040_base.lib_deps} + +[env:rpi_pico2_repeater] +extends = rpi_pico2 +build_flags = ${rpi_pico2.build_flags} + -D ADVERT_NAME='"Pico2 Repeater"' + -D ADVERT_LAT=0.0 + -D ADVERT_LON=0.0 + -D ADMIN_PASSWORD='"password"' + -D MAX_NEIGHBOURS=50 +; -D MESH_PACKET_LOGGING=1 +; -D MESH_DEBUG=1 +build_src_filter = ${rpi_pico2.build_src_filter} + +<../examples/simple_repeater> + +[env:rpi_pico2_room_server] +extends = rpi_pico2 +build_flags = ${rpi_pico2.build_flags} + -D ADVERT_NAME='"Pico2 Room"' + -D ADVERT_LAT=0.0 + -D ADVERT_LON=0.0 + -D ADMIN_PASSWORD='"password"' + -D ROOM_PASSWORD='"hello"' +; -D MESH_PACKET_LOGGING=1 +; -D MESH_DEBUG=1 +build_src_filter = ${rpi_pico2.build_src_filter} + +<../examples/simple_room_server> + +[env:rpi_pico2_companion_radio_usb] +extends = rpi_pico2 +build_flags = ${rpi_pico2.build_flags} + -D MAX_CONTACTS=350 + -D MAX_GROUP_CHANNELS=40 + -D ENABLE_USB_INTERFACE +; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1 +; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1 +build_src_filter = ${rpi_pico2.build_src_filter} + +<../examples/companion_radio/*.cpp> +lib_deps = ${rpi_pico2.lib_deps} + densaugeo/base64 @ ~1.4.0 +lib_ignore = BLE + +; [env:rpi_pico2_companion_radio_ble] +; extends = rpi_pico2 +; build_flags = ${rpi_pico2.build_flags} +; -D MAX_CONTACTS=100 +; -D MAX_GROUP_CHANNELS=8 +; -D BLE_PIN_CODE=123456 +; -D BLE_DEBUG_LOGGING=1 +; ; -D MESH_PACKET_LOGGING=1 +; ; -D MESH_DEBUG=1 +; build_src_filter = ${rpi_pico2.build_src_filter} +; +<../examples/companion_radio/*.cpp> +; lib_deps = ${rpi_pico2.lib_deps} +; densaugeo/base64 @ ~1.4.0 + +; [env:rpi_pico2_companion_radio_wifi] +; extends = rpi_pico2 +; build_flags = ${rpi_pico2.build_flags} +; -D MAX_CONTACTS=100 +; -D MAX_GROUP_CHANNELS=8 +; -D WIFI_DEBUG_LOGGING=1 +; -D WIFI_SSID='"myssid"' +; -D WIFI_PWD='"mypwd"' +; ; -D MESH_PACKET_LOGGING=1 +; ; -D MESH_DEBUG=1 +; build_src_filter = ${rpi_pico2.build_src_filter} +; +<../examples/companion_radio/*.cpp> +; lib_deps = ${rpi_pico2.lib_deps} +; densaugeo/base64 @ ~1.4.0 + +[env:rpi_pico2_terminal_chat] +extends = rpi_pico2 +build_flags = ${rpi_pico2.build_flags} + -D MAX_CONTACTS=350 + -D MAX_GROUP_CHANNELS=1 +; -D MESH_PACKET_LOGGING=1 +; -D MESH_DEBUG=1 +build_src_filter = ${rpi_pico2.build_src_filter} + +<../examples/simple_secure_chat/main.cpp> +lib_deps = ${rpi_pico2.lib_deps} + densaugeo/base64 @ ~1.4.0 + +[env:rpi_pico2_kiss_modem] +extends = rpi_pico2 +build_src_filter = ${rpi_pico2.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/rpi_pico2/target.cpp b/variants/rpi_pico2/target.cpp new file mode 100644 index 00000000000..9cd72d7234d --- /dev/null +++ b/variants/rpi_pico2/target.cpp @@ -0,0 +1,30 @@ +#include "target.h" + +#include +#include + +RpiPico2Board board; + +RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI1); + +WRAPPER_CLASS radio_driver(radio, board); + +VolatileRTCClock fallback_clock; +AutoDiscoverRTCClock rtc_clock(fallback_clock); +SensorManager sensors; + +#ifndef LORA_CR +#define LORA_CR 5 +#endif + +bool radio_init() { + rtc_clock.begin(Wire); + + return radio.std_init(&SPI1); +} + +mesh::LocalIdentity radio_new_identity() { + RadioNoiseListener rng(radio); + return mesh::LocalIdentity(&rng); // create new random identity +} + diff --git a/variants/rpi_pico2/target.h b/variants/rpi_pico2/target.h new file mode 100644 index 00000000000..7ff28707583 --- /dev/null +++ b/variants/rpi_pico2/target.h @@ -0,0 +1,19 @@ +#pragma once + +#define RADIOLIB_STATIC_ONLY 1 + +#include +#include +#include +#include +#include +#include + +extern RpiPico2Board board; +extern WRAPPER_CLASS radio_driver; +extern AutoDiscoverRTCClock rtc_clock; +extern SensorManager sensors; + +bool radio_init(); +mesh::LocalIdentity radio_new_identity(); +