diff --git a/Drivers/v4net.device/3.0-beta/AmigaOS/Devs/NetInterfaces/V4Net b/Drivers/v4net.device/3.0-beta/AmigaOS/Devs/NetInterfaces/V4Net new file mode 100644 index 0000000..036cda7 --- /dev/null +++ b/Drivers/v4net.device/3.0-beta/AmigaOS/Devs/NetInterfaces/V4Net @@ -0,0 +1,60 @@ +# $VER: V4Net 1.0 (23.01.2020) +# +# Configuration for the Vampire V4 internal Ethernet + +# The device name is mandatory +device=v4net.device +mtu=1492 + +# If not provided, unit number 0 will be used. You may +# have to change this if there are multiple cards of the +# same type installed in your machine, or if your network +# hardware supports several independent connections +#unit=0 + +# You must either pick a fixed (static) IPv4 address and +# a corresponding subnet mask, or request DHCP (dynamic) +# network address configuration. +# You can combine address/netmask/dhcp, which has the effect +# of asking the DHCP server to assign the requested IPv4 +# address and subnet mask to this interface, if possible. +#address=192.168.10.10 +#netmask=255.255.255.0 +configure=dhcp + +# If no DHCP server is present in your network, you can +# use automatic interface IPv4 address assignment through +# the ZeroConf protocol. Note that this will not set up +# default route and DNS servers for you, only the interface +# address is configured. +#configure=auto + +# This variant of automatic IPv4 address assignment should +# be used in a wireless network instead of 'configure=auto' +#configure=fastauto + +# You can enable diagnostic messages which can be helpful in +# tracking down configuration errors. +#debug=yes + +# You can choose how much memory will be used when handling +# incoming and outgoing network traffic for this device. +# The default is to reserve 32 buffers of 1500 byte each, both +# inbound and outbound traffic. Larger values may provide +# better performance. +iprequests=48 +#writerequests=32 + +# For diagnostic and monitoring purposes it can be helpful to +# capture network traffic that flows through this interface. +# To enable this option, select one of filter=local, +# filter=ipandarp or filter=everything +#filter=local +#filter=ipandarp +#filter=everything + +# This option disables a workaround required for the Ariadne +# network hardware, which, if enabled, would otherwise cause +# the interface setup procedure to take longer than really +# necessary. +requiresinitdelay=no diff --git a/Drivers/v4net.device/3.0-beta/AmigaOS/Devs/NetInterfaces/V4Net.info b/Drivers/v4net.device/3.0-beta/AmigaOS/Devs/NetInterfaces/V4Net.info new file mode 100644 index 0000000..f8e705f Binary files /dev/null and b/Drivers/v4net.device/3.0-beta/AmigaOS/Devs/NetInterfaces/V4Net.info differ diff --git a/Drivers/v4net.device/3.0-beta/AmigaOS/Devs/Networks/v4net.device b/Drivers/v4net.device/3.0-beta/AmigaOS/Devs/Networks/v4net.device new file mode 100644 index 0000000..e93dd70 Binary files /dev/null and b/Drivers/v4net.device/3.0-beta/AmigaOS/Devs/Networks/v4net.device differ diff --git a/Drivers/v4net.device/3.0-beta/ApolloOS/Devs/NetInterfaces/V4Net b/Drivers/v4net.device/3.0-beta/ApolloOS/Devs/NetInterfaces/V4Net new file mode 100644 index 0000000..036cda7 --- /dev/null +++ b/Drivers/v4net.device/3.0-beta/ApolloOS/Devs/NetInterfaces/V4Net @@ -0,0 +1,60 @@ +# $VER: V4Net 1.0 (23.01.2020) +# +# Configuration for the Vampire V4 internal Ethernet + +# The device name is mandatory +device=v4net.device +mtu=1492 + +# If not provided, unit number 0 will be used. You may +# have to change this if there are multiple cards of the +# same type installed in your machine, or if your network +# hardware supports several independent connections +#unit=0 + +# You must either pick a fixed (static) IPv4 address and +# a corresponding subnet mask, or request DHCP (dynamic) +# network address configuration. +# You can combine address/netmask/dhcp, which has the effect +# of asking the DHCP server to assign the requested IPv4 +# address and subnet mask to this interface, if possible. +#address=192.168.10.10 +#netmask=255.255.255.0 +configure=dhcp + +# If no DHCP server is present in your network, you can +# use automatic interface IPv4 address assignment through +# the ZeroConf protocol. Note that this will not set up +# default route and DNS servers for you, only the interface +# address is configured. +#configure=auto + +# This variant of automatic IPv4 address assignment should +# be used in a wireless network instead of 'configure=auto' +#configure=fastauto + +# You can enable diagnostic messages which can be helpful in +# tracking down configuration errors. +#debug=yes + +# You can choose how much memory will be used when handling +# incoming and outgoing network traffic for this device. +# The default is to reserve 32 buffers of 1500 byte each, both +# inbound and outbound traffic. Larger values may provide +# better performance. +iprequests=48 +#writerequests=32 + +# For diagnostic and monitoring purposes it can be helpful to +# capture network traffic that flows through this interface. +# To enable this option, select one of filter=local, +# filter=ipandarp or filter=everything +#filter=local +#filter=ipandarp +#filter=everything + +# This option disables a workaround required for the Ariadne +# network hardware, which, if enabled, would otherwise cause +# the interface setup procedure to take longer than really +# necessary. +requiresinitdelay=no diff --git a/Drivers/v4net.device/3.0-beta/ApolloOS/Devs/NetInterfaces/V4Net.info b/Drivers/v4net.device/3.0-beta/ApolloOS/Devs/NetInterfaces/V4Net.info new file mode 100644 index 0000000..f8e705f Binary files /dev/null and b/Drivers/v4net.device/3.0-beta/ApolloOS/Devs/NetInterfaces/V4Net.info differ diff --git a/Drivers/v4net.device/3.0-beta/ApolloOS/Devs/Networks/v4net.device b/Drivers/v4net.device/3.0-beta/ApolloOS/Devs/Networks/v4net.device new file mode 100644 index 0000000..e93dd70 Binary files /dev/null and b/Drivers/v4net.device/3.0-beta/ApolloOS/Devs/Networks/v4net.device differ